blown head gasket! damn...
Mar 12, 2008 | 12:28 PM
#2
Registered User
Joined: Sep 2005
Posts: 1,481
Likes: 6
From: Northern IL
Nice. That's right where mine was leaking.
My blown hg was caused by a hole in the coolant hose that runs on the driver's side of the block. I was losing coolant and never really checked it and it got hot and warped the head. I had to get it machined before replacing the hg.
Rob
My blown hg was caused by a hole in the coolant hose that runs on the driver's side of the block. I was losing coolant and never really checked it and it got hot and warped the head. I had to get it machined before replacing the hg.
Rob
Mar 12, 2008 | 01:43 PM
#3
Thread Starter
Registered User
Joined: Jan 2008
Posts: 356
Likes: 0
From: granada hills ca
maybe a month ago before i replaced my water pump and hoses it got almost to the red a few times, im thinking thats what did it, but no oil in the water and vs versa. This motor is pretty rusty inside, im thinking about just replaceing the motor. i need to do a clutch as well.
Thread
Thread Starter
Forum
Replies
Last Post
kgcwb44
86-95 Trucks & 4Runners (Build-Up Section)
4
Jan 29, 2023 10:02 AM
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
Jul 14, 2020 08:35 PM
FS[PacSouthWest]: FS: A340 transmission and t/case Lancaster Ca
4x4-runner
Engines - Transmissions
4
Dec 27, 2016 01:58 PM
