Auto guy
Jul 23, 2011 | 01:42 PM
#1
Thread Starter
Registered User
Joined: Feb 2010
Posts: 141
Likes: 1
From: Gainesville,GA
Auto guy
Hey trying to figure out the best way to run my trans cooler. I am not using the one in the radiator at all. I am buying this cooler should be big enough i hope http://www.summitracing.com/parts/DER-15830/.
Also was thinking of running rubber lines and mount it under the truck. So i need to know what size fitting goes in the inlet and outlet of the trans. So i can run the fitting to a barbed end and then run rubber lines. Let me know what you think and post pics of your setup.
Also was thinking of running rubber lines and mount it under the truck. So i need to know what size fitting goes in the inlet and outlet of the trans. So i can run the fitting to a barbed end and then run rubber lines. Let me know what you think and post pics of your setup.
Jul 23, 2011 | 07:48 PM
#2
Hey trying to figure out the best way to run my trans cooler. I am not using the one in the radiator at all. I am buying this cooler should be big enough i hope http://www.summitracing.com/parts/DER-15830/.
Also was thinking of running rubber lines and mount it under the truck. So i need to know what size fitting goes in the inlet and outlet of the trans. So i can run the fitting to a barbed end and then run rubber lines. Let me know what you think and post pics of your setup.
Also was thinking of running rubber lines and mount it under the truck. So i need to know what size fitting goes in the inlet and outlet of the trans. So i can run the fitting to a barbed end and then run rubber lines. Let me know what you think and post pics of your setup.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
skoti89
Offroad Tech
3
Jul 8, 2015 12:05 AM
