99 trd tacoma locker
02-09-2015, 03:48 PM
#1
99 trd tacoma locker
sorry for the post because i am sure somewhere it is blasted all over the internet but with my searches, possibly due to my wording, i cannot find the exact answer
will the factory trd rear locker from a 99 tacoma fit into the housing and match the axle splines of the 3rd generation toyota pickup? i am fairly positive that it will, i am also fairly positive that he housing will have to be cut and there will need to be 2 or 3 bolts redrilled and tapped.
just looking for a little more reassurance, possibly even a definitive yes! lol
thanks guys
will the factory trd rear locker from a 99 tacoma fit into the housing and match the axle splines of the 3rd generation toyota pickup? i am fairly positive that it will, i am also fairly positive that he housing will have to be cut and there will need to be 2 or 3 bolts redrilled and tapped.
just looking for a little more reassurance, possibly even a definitive yes! lol
thanks guys
02-09-2015, 05:42 PM
#2
Registered User
Join Date: Nov 2014
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
1uzRunner
84-85 Trucks & 4Runners (Build-Up Section)
63
11-10-2018 03:58 PM
FS[FourCorners]: First Gen Tacoma/4Runner Manual Hub Spindles
G-off
Axles - Suspensions - Tires - Wheels
2
12-29-2015 12:44 PM
zz_denis
95.5-2004 Tacomas & 96-2002 4Runners
2
09-06-2015 03:43 PM
justdifferentials
Vendors Build-Ups (Build-Up Section)
0
09-05-2015 06:52 PM
