Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

92 3vz oil leakage question

Thread Tools
 
Search this Thread
 
Old Dec 7, 2007 | 01:45 PM
  #1  
T_BONE's Avatar
Thread Starter
Registered User
 
Joined: Feb 2006
Posts: 56
Likes: 0
From: Hattiesburg, MISSISSIPPI
Question 92 3vz oil leakage question

I got an oil leak i am having trouble finding. it is coming from the pass side of engine near the rear and is also coming out of the bell housing where the slave cylinder goes in. now i have recently changed out the clutch and the rear main cuz i thought t was there but there is no sign of a bad rear seal. Could it be the valve cover gasket leakingdown into the bell housing? it is leaking but dont know if it could get into bell housing that bad. Any suggestions?
Reply
Old Dec 7, 2007 | 02:12 PM
  #2  
liferunner2's Avatar
Registered User
 
Joined: Dec 2007
Posts: 65
Likes: 0
From: Houston, TX
I have what sounds like a similar leak and can not identify a source for sure, but it looks as though it may be leaking from the rear of the valve covers. Mine (the leak) is somewhere up high on the engine and near the firewall, but it's hard to say where exactly. I'm going to go to the car wash and rinse the bottom/sides of the engine/tranny with hot water as soon as it warms up a little (the past few days have been cold maybe 20F). That should help to locate it. Good luck.

Chris
Reply
Old Dec 7, 2007 | 03:01 PM
  #3  
leiniesred's Avatar
Registered User
 
Joined: Jun 2004
Posts: 272
Likes: 0
That'll be your passenger side valve cover gasket leaking.
Flows down to the back of the engine and on down.

NAPA fel-pro replacements are workin' just fine for me after a year.
Reply
Old Dec 7, 2007 | 03:34 PM
  #4  
T_BONE's Avatar
Thread Starter
Registered User
 
Joined: Feb 2006
Posts: 56
Likes: 0
From: Hattiesburg, MISSISSIPPI
thanx for the replies. I have looked with the engine clean and the valve covers are leaking but can it get "into" the bell housing from the top? I do see where it is running down on the starter and rear of engine but it is also coming out of the boot that goes to the clutch slave cylinder. thats what is throwing me for a loop. it not rear main seal though.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bigjstang
86-95 Trucks & 4Runners
21
Jun 2, 2025 03:56 PM
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
Jul 14, 2020 08:35 PM
thefishguy77
Newbie Tech Section
10
Jul 30, 2015 10:59 AM
88yodabasket
86-95 Trucks & 4Runners
15
Jul 13, 2015 01:32 PM
Coreyr384
86-95 Trucks & 4Runners
2
Jul 10, 2015 11:13 AM




All times are GMT -8. The time now is 04:06 PM.