91 4runner starter wire plug
Mar 27, 2012 | 06:47 AM
#1
Thread Starter
Registered User
Joined: Apr 2009
Posts: 8
Likes: 0
From: New Jersey
91 4runner starter wire plug
Starter wire plug connector needed
I have a 1991 4runner SR5 V6 4WD automatic. A few months ago we changed the starter and we discovered that the wire with plastic connector that snaps into the starter housing was bad. We cut it off and installed a stake on lug. This works temporally but sometimes looses conductivity from vibration and I want to replace the plug with the correct part. I have been told by Toyota that I would have to purchase the entire harness as they do not offer the connector plug separately. I have been unable to find anything about this connector. The local parts guy said that if I got a number from the plug he might be able to help me. We threw it away. Does anyone know of anything like a replacement plug?
Any help would be appreciated
Thanks
Wildcatsrock
Carlstadt NJ 07072
I have a 1991 4runner SR5 V6 4WD automatic. A few months ago we changed the starter and we discovered that the wire with plastic connector that snaps into the starter housing was bad. We cut it off and installed a stake on lug. This works temporally but sometimes looses conductivity from vibration and I want to replace the plug with the correct part. I have been told by Toyota that I would have to purchase the entire harness as they do not offer the connector plug separately. I have been unable to find anything about this connector. The local parts guy said that if I got a number from the plug he might be able to help me. We threw it away. Does anyone know of anything like a replacement plug?
Any help would be appreciated
Thanks
Wildcatsrock
Carlstadt NJ 07072
Last edited by waskillywabbit; Mar 27, 2012 at 10:42 AM. Reason: No classifieds in tech please
Mar 27, 2012 | 09:04 AM
#2
Registered User
Joined: Dec 2010
Posts: 1,295
Likes: 1
From: tacoma wa
u might be able to look up something on ebay sometimes the guys that ship from china have those parts and are cheap. or go to local wrecking yard and get it, wont be more than 2.00-3.00 bucks for just that wire and clip. then just connect it to ur harness and call it good...
Mar 30, 2012 | 04:27 PM
#4
Thread Starter
Registered User
Joined: Apr 2009
Posts: 8
Likes: 0
From: New Jersey
Hey Calvinh, I really appreciate your offer and i am intrested in it. Is there any way that you could mail it to me? I'd be willing to send you a money order to cover the cost and your trouble.I live in Carlstadt New Jersey 07072. Let me know if this is possible and what it would take.
Thanks again for your help.
Thanks again for your help.
Mar 30, 2012 | 11:43 PM
#6
Registered User
iTrader: (1)
Joined: Apr 2009
Posts: 13,381
Likes: 100
From: I live in New Tripoli Pa out in the woods
All you need is a female spade connector it is a common item get the insulated kind.
I replace them all the time and also make the wire longer that way I can disconnect the wires once the starter is lowered down.
I solder a uninsulated butt connector and heat shrink the splice.
When ever a starter comes down on my Toyota vehicles i do this never had any issues.
If you need a picture I will be glad to take one for you.
I replace them all the time and also make the wire longer that way I can disconnect the wires once the starter is lowered down.
I solder a uninsulated butt connector and heat shrink the splice.
When ever a starter comes down on my Toyota vehicles i do this never had any issues.
If you need a picture I will be glad to take one for you.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
