60's and 44's is running
#1
Registered User
Thread Starter
Join Date: Oct 2004
Location: Okanagan BC
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
60's and 44's is running
sorry havent posted in a while been busy building
part1 https://www.yotatech.com/forums/f88/60s-44s-163083/
part2 https://www.yotatech.com/forums/f88/...update-163409/
got the engine fired d-shafts built and steering working.
Drove it around the parking lot ,clutch is grabbing can hold it while in gear but
cannot shift normally.
Any ideas its got the stock 4runner master with chev sm465 slave.gonna try a chev master unless there are any other suggestions.
a video of it driving(its still processing so i dont know how long that will take)
http://www.youtube.com/watch?v=l7XZLMBJBV8
part1 https://www.yotatech.com/forums/f88/60s-44s-163083/
part2 https://www.yotatech.com/forums/f88/...update-163409/
got the engine fired d-shafts built and steering working.
Drove it around the parking lot ,clutch is grabbing can hold it while in gear but
cannot shift normally.
Any ideas its got the stock 4runner master with chev sm465 slave.gonna try a chev master unless there are any other suggestions.
a video of it driving(its still processing so i dont know how long that will take)
http://www.youtube.com/watch?v=l7XZLMBJBV8
#2
Registered User
That is awesome. Also, I am glad to see a fellow British Columbian with such a sweet ride. Everytime I go through the Okanogen I see a bunch of huge trucks, but I never have time to stop and have fun.
#5
Registered User
Thread Starter
Join Date: Oct 2004
Location: Okanagan BC
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
#6
Thats just nasty!!! Looks mean and sounds meaner
Good luck on the clutch thing. I had the same problem, but it was wrong pressure plate bolts, wouldn't sit flush on the flywheel, so it would drag as well. Fixed that, good luck!!
Good luck on the clutch thing. I had the same problem, but it was wrong pressure plate bolts, wouldn't sit flush on the flywheel, so it would drag as well. Fixed that, good luck!!
Trending Topics
#10
Registered User
#12
Registered User
Join Date: Apr 2009
Location: Suisun City, California
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
When I had a G58 tranny in my 4runner it did what you are talking about. It turned out that the clip that holds the throw out bearing broke and allowed it to turn.
Also nice rig.
Also nice rig.
#14
Registered User
Thread Starter
Join Date: Oct 2004
Location: Okanagan BC
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
#15
Registered User
Thread Starter
Join Date: Oct 2004
Location: Okanagan BC
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
#18
Registered User
nice. youll love the stability of those full withs.
looks like you have plenty of clearance.....47" ltb what?
looks like you have plenty of clearance.....47" ltb what?
Last edited by rattlewagon; 01-19-2010 at 06:33 AM.