The bed on my '89 is really rusty and the fenders are falling apart. The truck was used at a marina for launching boats (so I was told). I bought the truck for $100, I replaced the rear brakelines and a fuel line and it runs great. I would like to replace the bed with a flatbed eventually down the road and was wondering if it's a difficult process to do a simple flatbed? Advice? Ideas? Post pics of your flatbed setup if you have 'em please! Thanks!

 

Since your new, ill give you this one, but for future reference you piss off the locals when you post without searching first.

https://www.yotatech.com/forums/f88/...-build-191787/

Here's toyospearo's flat bed build. Search flat bed build next time.

 

Alrighty, will do next time! Thank you!

 

Toyospearo's is one of the nicest I have seen.
Here is a thread that can give you some ideas
http://www.pirate4x4.com/forum/toyot...ed-thread.html

Also check out drew303's build
https://www.yotatech.com/forums/f199...truggy-228074/

 

Dropzone, thank you for posting those threads! The gears are turning! When I get around to making the flatbed, it'll be tailored to haul my motorcycle so the flatbed may be longer than the ones pictured. Thanks again!