Small plate on rear leaf springs??
#1
Registered User
Thread Starter
Join Date: Feb 2006
Location: san diego
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
Small plate on rear leaf springs??
There is a small plate on top of the stock rear leaf springs that the bump stop sits on... should i reuse them or no?
Another question... should I run hydro or pressurized shocks??
Another question... should I run hydro or pressurized shocks??
Last edited by deserttoy84; 06-04-2007 at 12:41 AM.
#2
I have cheapy hydro's but I don't drive my truck except to the trail. For slow speed stuff shocks are unnecessary anyway. I just have them for on road driving to the trail. If you DD your rig I hear the gas shocks like Bilstien ride better.
The little plate doesn't matter at all. You can put the bump stop back on top of the springs without it and it will work just fine. I think it's just there to provide a little more clearance between the bottom of the bump stop and the center bolt in the springs.
The little plate doesn't matter at all. You can put the bump stop back on top of the springs without it and it will work just fine. I think it's just there to provide a little more clearance between the bottom of the bump stop and the center bolt in the springs.
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
04-11-2024 04:39 PM
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
BeMiceElf
Misc Stuff (Vehicle Related)
7
10-10-2015 09:40 PM
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM