Hey so I'm 99% sure I have the V6 brake booster and a regular brake master cylinder.... I had my original rotors turned and the brake pads were clean when I rebuilt the front axel. Is there any way to tell if my calipers/rotors are from a v6 to? My truck is pulling to right when braking. so I was gonna rebuild the calipers and replace the pads. But I'm not sure if I have the 22r/re front brake calipers/rotors etc... Here is a picture of my brake booster/cylinder just in case I can take some of calipers if neded

 

I'm about 80% sure v6 calipers have 4 equal size Pistons where as 4cyl have 2 large and 2 small, but here's my v6 calipers for comparison

 

Ok cool, thank you. I'll pull them off this weekend and check the Pistons. I just was hoping to not have to order parts for both lol.