84-85 Trucks & 4Runners 2nd gen pickups and 1st gen 4Runners with solid front axles

Dave's 1984 Toyo Pickup. Marlin Crawler, and lots o stuff.

Old Nov 12, 2012 | 01:32 PM
  #21  
DaveS's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 151
Likes: 0
From: Chattanooga TN
Its near the left side. No puddle just a tad wet. And before i carpet i wanna fix it. Idk if its from the clutch or not. My windows seal kinda iffy...maybe that...idk
Reply
Old Nov 12, 2012 | 01:40 PM
  #22  
Redeth005's Avatar
Registered User
 
Joined: Apr 2012
Posts: 2,817
Likes: 2
From: Los Angeles CA
If its on the left side near your clutch pedal then thats more the likely gonna be it unless you mean its closer to the door or seat area. Ive had that type of leak in 2 of my cars in the past.
Reply
Old Nov 12, 2012 | 02:48 PM
  #23  
DaveS's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 151
Likes: 0
From: Chattanooga TN
What's da fix? Also do any of yall know anything about the marlin crawler setup? Trying to figure out what these sticks should be in
Reply
Old Nov 12, 2012 | 03:22 PM
  #24  
tinigunner11's Avatar
Registered User
iTrader: (1)
 
Joined: Sep 2011
Posts: 194
Likes: 1
From: johnstown, Colorado
holy crap!!! i guess the kid didnt know what he had! great looking truck, the flex in the last pic is so amazing I think i cried or peed. great truck hope you find he clutch/somewhere leak.
Reply
Old Nov 12, 2012 | 03:33 PM
  #25  
DaveS's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 151
Likes: 0
From: Chattanooga TN
The kid says because of the doubler the stock toyota 4wd stick goes all the way down..which is the 4LO position..He said if I want lower gearing I can push it all the way up into the stock 4hi position and it will be toyota 2wd with lower gears. So if I want 4wd Its strictly managed by the Marlin stick. Then if I want to double down the gears I can put it in the Marlin Low gear on the 3rd stick... who knows. I wish someone knew about this ˟˟˟˟!
Reply
Old Nov 12, 2012 | 03:34 PM
  #26  
artguess's Avatar
Registered User
 
Joined: Sep 2010
Posts: 1
Likes: 0
Cool lookin truck. I love the hood and am going with a similar paint scheme on my pure four race truck which I am trying to get a pic of it on here at some point.
Reply
Old Nov 12, 2012 | 03:41 PM
  #27  
DaveS's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 151
Likes: 0
From: Chattanooga TN
Thanks man!
Reply
Old Nov 12, 2012 | 04:01 PM
  #28  
yoder519's Avatar
Registered User
 
Joined: Feb 2008
Posts: 1,816
Likes: 2
From: virginia
nice yoder, it looks familiar, did you get it off a guy thats on nc4x4? cant remember his user name, seems he used to wheel a tacoma?
Reply
Old Nov 12, 2012 | 04:03 PM
  #29  
DaveS's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 151
Likes: 0
From: Chattanooga TN
I got it off a kid..didnt know much about it. It was built in sc or nc near windrock.
Reply
Old Nov 13, 2012 | 12:21 PM
  #30  
DaveS's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 151
Likes: 0
From: Chattanooga TN
Need some opinions..this is pretty gay but ill ask anyways. The truck is eventually going to be a clean dd and a mean crawler also..Thinking of removing the two huge marlin round stickers at the end of the bed and replacing with some TRD stickers...then adding maybe 1 Marlin sticker to the rear window. Thoughts ?
Reply
Old Nov 13, 2012 | 06:02 PM
  #31  
Greg_Canada's Avatar
Registered User
 
Joined: Jul 2004
Posts: 1,231
Likes: 1
From: Toronto
Originally Posted by DaveS
The kid says because of the doubler the stock toyota 4wd stick goes all the way down..which is the 4LO position..He said if I want lower gearing I can push it all the way up into the stock 4hi position and it will be toyota 2wd with lower gears. So if I want 4wd Its strictly managed by the Marlin stick. Then if I want to double down the gears I can put it in the Marlin Low gear on the 3rd stick... who knows. I wish someone knew about this ˟˟˟˟!
OK, you have a double with a twin stick.
The front stick is low or high only. the rear is 2wd or 4wd, and low or hi.
You can run the front in low, rear high, front low, rear low, 2wd or 4wd, your choice. So many gearing options. It's likely either the front or the rear has stock 2.27:1 gears, and the other has 4:1 gears, so you can choose many different options. That setup alone is worth almost 2 grand.
Reply
Old Nov 14, 2012 | 03:11 AM
  #32  
DaveS's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 151
Likes: 0
From: Chattanooga TN
The front has the stock gearing, rear is the crawler gear.
Reply
Old Nov 14, 2012 | 07:47 AM
  #33  
westjohns yota's Avatar
Registered User
 
Joined: May 2011
Posts: 1,751
Likes: 0
From: pensacola FL
so here lets make it like this, the front stick can go in the high range, the stick next to you can go into high range, and the stick next to the passenger seat can go to 2wd, there your in 2h
Reply
Old Nov 14, 2012 | 07:52 AM
  #34  
DaveS's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 151
Likes: 0
From: Chattanooga TN
I got it..lol
Reply
Old Nov 14, 2012 | 12:54 PM
  #35  
ihuntsum's Avatar
Registered User
 
Joined: Nov 2012
Posts: 17
Likes: 0
Looks good
Reply
Old Nov 21, 2012 | 04:06 AM
  #36  
DaveS's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 151
Likes: 0
From: Chattanooga TN
Got a new WARN windshield banner (WARN GO PREPARED) (kinda gay)...

ANy idea how much it would cost to have a carb rebuilt? I have the kit..Im getting a goofy idle sometimes..and a backfire about half the times I shut it off. Prolly the carb.. right?
Reply
Old Nov 21, 2012 | 09:23 AM
  #37  
Redeth005's Avatar
Registered User
 
Joined: Apr 2012
Posts: 2,817
Likes: 2
From: Los Angeles CA
Lol you should have gotten that jeep quote. "Jeeps are like tampons. Every půssı has one."
Ooooo yea I said it lol jk but u gotta admit that one is funny.

Last edited by Redeth005; Nov 21, 2012 at 10:10 AM.
Reply
Old Nov 25, 2012 | 10:40 AM
  #38  
DaveS's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 151
Likes: 0
From: Chattanooga TN
I used to have one that said imports are like tampons..
Got you guys some random pics lol
Attached Thumbnails Dave's 1984 Toyo Pickup. Marlin Crawler, and lots o stuff.-forumrunner_20121125_143942.png   Dave's 1984 Toyo Pickup. Marlin Crawler, and lots o stuff.-forumrunner_20121125_143950.png   Dave's 1984 Toyo Pickup. Marlin Crawler, and lots o stuff.-forumrunner_20121125_143959.png   Dave's 1984 Toyo Pickup. Marlin Crawler, and lots o stuff.-forumrunner_20121125_144008.png   Dave's 1984 Toyo Pickup. Marlin Crawler, and lots o stuff.-forumrunner_20121125_144023.png  

Dave's 1984 Toyo Pickup. Marlin Crawler, and lots o stuff.-forumrunner_20121125_144036.png  
Reply
Old Nov 26, 2012 | 07:04 AM
  #39  
DaveS's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 151
Likes: 0
From: Chattanooga TN
Here..All the pictures you could want. Body, interior, suspension, tires, drivetrain, everything..

PIC WHORE!!!!!!!!!



































Last edited by DaveS; Nov 26, 2012 at 07:07 AM.
Reply
Old Nov 26, 2012 | 07:04 AM
  #40  
DaveS's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 151
Likes: 0
From: Chattanooga TN


































Reply

Thread Tools
Search this Thread

All times are GMT -8. The time now is 09:19 PM.