hello all

i just recently purchased my first 4runner. ive had a few pick ups but i finally got me a runner.

the back window worked fine. was a bit slow and need a little help at the top but she did roll up and down. i was removing the top and forgot to disconnect the plug for the window and it yanked itself apart as we removed the top. ive put the top back on and now the window will not roll back up when using the switch or with the key. at first inspection of the connector it appears to be fine with no damage. i just read something about the "safety bolts need to be in or in some order so the window can roll up? anyone have any ideas or any info on this.. would be much appreciated ty

 

Loads of info on these back window issues on here already...

Saftey switch is shown below, either put the short bolt back in or bipass the switch..

 

problem fixed ty. was the safety switch..