96 lt1 conversion
#1
Registered User
Thread Starter
96 lt1 conversion
Hey everyone first post here, I have a 85 pick up that I am getting ready to drop a 96 lt1 V8 Corvette motor into. I already have the motor and am getting ready to order Yukon front and rear axle's along with a drive shaft extension. Going to be putting a GM 4l60e transmission in as well I'm just trying to think of everything else I'm going to need as I have not found any info on a swap like this, any reccomendations?
#2
Registered User
iTrader: (1)
Up grade parts as the break !
What you really will have is a Toyota Cab on a custom drive train
The drivetrain was built for a little over a 100 horse power your going to around 300 horse power
Because everyone tends to like different brands hard to find ,hard and fast info.
Best of luck
What you really will have is a Toyota Cab on a custom drive train
The drivetrain was built for a little over a 100 horse power your going to around 300 horse power
Because everyone tends to like different brands hard to find ,hard and fast info.
Best of luck
#3
Registered User
iTrader: (1)
Have your trans gone through by someone that knows them. Depending of the 4L60 it could be great or 15,000 miles and garbage from the factory. I got a good one behind my 99.5 5.3 silverado. Over 300,000 on a stock transmission and motor. I am the only one I know with that luck. Most have had to rebuild it 1 time at least.
Thread
Thread Starter
Forum
Replies
Last Post
JTR70
86-95 Trucks & 4Runners
78
01-11-2024 08:25 AM
ironroad9c1
The Classifieds GraveYard
6
12-05-2007 02:01 AM
Simann
86-95 Trucks & 4Runners
12
09-21-2006 01:11 PM
Wopicetti
95.5-2004 Tacomas & 96-2002 4Runners
5
07-27-2004 07:53 PM