I have searched all over this forum, and I am taking the manual steering out of my 81, and putting in the power steering from an 81/82.

Problem the guy i got them from gave me all the parts, I'm pretty sure, but I'm having a problem with the bracket, I dont know where it goes, and the book isn't any help.

could someone post a pick of the bracket mounted on their truck! the bracket with the pulley and where it mounts to the block.

Thanks to all

Jason

 

Don't hold your breath...but I'll try to get a photo up sometime soon. It's really weird. I remember it taking me almost an hour to figure out how it bolted on. If you check the FSM, you can kind of see how it might go, but I agree, it's not much help.

 

SO what is the status? I will be doing a Power Steering add to my 80 soon.

 

the braket should fit right on the front face of the head and just under the dist.there should be three bolt holes under the dist and one directly center of the front of the head

 

pics not working sorry

 

Here is a pic. I just put my PS bracket back on but with a TC saginaw pump installed
There are 2 bolts to the right of the distributor. And one bolt on left behind pump. Other is located on the head where the tensioner pully goes.