Hey 1st Gen Pickup Crowd! **83 & Earlier ONLY** (Post your Pics Please!)
Aug 21, 2012 | 03:34 AM
#1901
Registered User
Joined: Apr 2007
Posts: 211
Likes: 1
From: Brandon Ms
Thanks Just grinded down that side recently and primed it, gotta do the gate then the other side, I just havent put the rear marker back on, factory am radio so i havent worried about a antenna lol, It didnt have hub caps stock, just a small black plastic 5 star that covered the lug nuts and hubs with the old school T in the middle and i havent ran across any.
Aug 22, 2012 | 07:35 PM
#1902
Registered User
Joined: Nov 2011
Posts: 566
Likes: 1
From: Bellingham, WA
[GVIDEO][/GVIDEO]Apparently my response was taken wrong... My post was in response to the body lift, not the truck. The truck is pretty awesome! Sorry 'bout the confusion.
Aug 23, 2012 | 08:25 AM
#1904
Registered User
Joined: Aug 2012
Posts: 27
Likes: 0
Lol, its ok....
Like I said, I didn't do the lifting, and I would have tried to do things a little differently. But in the builders defense, I don't think it was possible to put that body on the chevy frame with the 350 motor without any sort of body lift. As it sits right now, the ignition cap is about an inch from hitting the firewall, and the radiator is not far from hitting the hood.
Like I said, I didn't do the lifting, and I would have tried to do things a little differently. But in the builders defense, I don't think it was possible to put that body on the chevy frame with the 350 motor without any sort of body lift. As it sits right now, the ignition cap is about an inch from hitting the firewall, and the radiator is not far from hitting the hood.
Aug 24, 2012 | 04:03 AM
#1905
Registered User
Joined: Dec 2007
Posts: 101
Likes: 0
From: Nor Cal
Lol, its ok....
Like I said, I didn't do the lifting, and I would have tried to do things a little differently. But in the builders defense, I don't think it was possible to put that body on the chevy frame with the 350 motor without any sort of body lift. As it sits right now, the ignition cap is about an inch from hitting the firewall, and the radiator is not far from hitting the hood.
Like I said, I didn't do the lifting, and I would have tried to do things a little differently. But in the builders defense, I don't think it was possible to put that body on the chevy frame with the 350 motor without any sort of body lift. As it sits right now, the ignition cap is about an inch from hitting the firewall, and the radiator is not far from hitting the hood.
Aug 24, 2012 | 10:00 AM
#1906
Registered User
Joined: Nov 2011
Posts: 566
Likes: 1
From: Bellingham, WA
Aug 24, 2012 | 06:44 PM
#1907
Registered User
Joined: Aug 2011
Posts: 2
Likes: 0
From: qc, Canada
and DSMISS is right, mine sits at the same height and the engine barely clears after the cutting....
Last edited by grasskutter1; Aug 24, 2012 at 06:48 PM.
Sep 4, 2012 | 06:07 PM
#1908
Registered User
Joined: Mar 2011
Posts: 69
Likes: 0
From: Sacramento, CA
Hey everyone! Just picked this up about a month ago and loving the heck out of it. I'm a previous chevy guy but I wanted something smaller and have always wanted a 1st gen Toy now I got one 
22R bored .50 over, port and polished head, Torque cam.
Hi steer w/cross over of course
trussed axles with locked rear, geared 5.29 F&R, open front carrier
recently installed Marlin HD L52
oh and a Marlin Doubler with 4.7 gears
Now for a few pics:
22R bored .50 over, port and polished head, Torque cam.
Hi steer w/cross over of course
trussed axles with locked rear, geared 5.29 F&R, open front carrier
recently installed Marlin HD L52
oh and a Marlin Doubler with 4.7 gears
Now for a few pics:
I swear I've seen that truck on f street many times. I even stopped one day driving for work a checked it out. Didn't stay too long, I'd hammer someone crawling g under my yota, damn cat robbers
And I agree with drop zone on the wonderful world of sliders, not that I have any
Here's my heap before and after
Crappy 3inch body lift
Sep 4, 2012 | 11:10 PM
#1909
Registered User
Joined: Aug 2012
Posts: 10
Likes: 0
Lol I bought it from a dude up there. Really cool guy, if u want to know any more about this truck
Pm me as he has a full build I can link u to. Only thing I have done to it is just the marlin tranny and small personalizing (so far) :-)
Pm me as he has a full build I can link u to. Only thing I have done to it is just the marlin tranny and small personalizing (so far) :-)
Sep 5, 2012 | 01:50 PM
#1911
Registered User
Joined: Mar 2011
Posts: 69
Likes: 0
From: Sacramento, CA
I've owned two trucks with the wings, and now this one without. I like em without personally, just cause the window is bigger, and I can hang out the truck farther. I hadn't really noticed until you mentioned it.
She came with the mirrors. I know they are not toyotas....so apparently they are Chevys, cool. I like em, I had your mirrors once, they always seemed to drift up when I drove from the vibes
She came with the mirrors. I know they are not toyotas....so apparently they are Chevys, cool. I like em, I had your mirrors once, they always seemed to drift up when I drove from the vibes
Sep 5, 2012 | 06:18 PM
#1914
Registered User
Joined: Aug 2012
Posts: 57
Likes: 0
From: Petaluma California
OH what the heck ill throw some of mine up. Specs:
1980 4x4, 20r, L52, 30/9.50's, 4:37's, 6 inch shackles, push bar glasspack mostly stock
Soon to come:
3 inch Trailgear leafs, Weber 32/36 lunchbox locker, trussed front axle. 1.5 wheel spacers, dual cases
Build:
http://board.marlincrawler.com/index.php?topic=90870.0
1980 4x4, 20r, L52, 30/9.50's, 4:37's, 6 inch shackles, push bar glasspack mostly stock
Soon to come:
3 inch Trailgear leafs, Weber 32/36 lunchbox locker, trussed front axle. 1.5 wheel spacers, dual cases
Build:
http://board.marlincrawler.com/index.php?topic=90870.0
Last edited by MortalYota; Sep 5, 2012 at 06:21 PM.
Sep 25, 2012 | 08:52 PM
#1919
Registered User
Joined: Jun 2010
Posts: 487
Likes: 1
From: West Virginia : the state not near Richmond!
Found a Trekker (right name?) Last weekend at the swap meet, couldn't track down the owner though (or I woulda tried to buy it...) Kinda dissapointed, woulda loved to hear about it's history.
Sep 25, 2012 | 11:20 PM
#1920
Hey everyone! Just picked this up about a month ago and loving the heck out of it. I'm a previous chevy guy but I wanted something smaller and have always wanted a 1st gen Toy now I got one
22R bored .50 over, port and polished head, Torque cam.
Hi steer w/cross over of course
trussed axles with locked rear, geared 5.29 F&R, open front carrier
recently installed Marlin HD L52
oh and a Marlin Doubler with 4.7 gears
Now for a few pics:
22R bored .50 over, port and polished head, Torque cam.
Hi steer w/cross over of course
trussed axles with locked rear, geared 5.29 F&R, open front carrier
recently installed Marlin HD L52
oh and a Marlin Doubler with 4.7 gears
Now for a few pics:
