FS[PacSouthWest]: F/R solid axle+miscellaneous part out Bay Area, CA
#1
F/R solid axle+miscellaneous part out Bay Area, CA
Front and rear axles, I was told they have 4.88s in them, but I don't know for sure. Stock leaf springs with big shackles. Decent frame, a flat bed with trailer hitch. Front needs full rebuild and locking hubs. Will not separate. 200 OBO for the pair.
There is a 2wd tranny of some kind, I am told was meant to bolt to a 3.4L and an R series 4x4 transmission, I believe. Also told it came from a 3.4L. I don't know much about them, you can spin the input shaft, but it's pretty rusty. No idea the condition of internals. 40 dollars or free with purchase of axles.
Flat bed, looks to be made of HREW, could be cut up into new sections of tubing
or used as is 50 Dollars.
H1 conversion headlights, no bulbs included, round for pre 82 first gen. 20 dollars.
Frame, looks to be in ok shape, has motor mounts cut off and replaced from a chevy vortec V6 swap. 50 dollars. You do all the wrenching to remove parts not wanted.
I'm keeping the cab.






There is a 2wd tranny of some kind, I am told was meant to bolt to a 3.4L and an R series 4x4 transmission, I believe. Also told it came from a 3.4L. I don't know much about them, you can spin the input shaft, but it's pretty rusty. No idea the condition of internals. 40 dollars or free with purchase of axles.
Flat bed, looks to be made of HREW, could be cut up into new sections of tubing
or used as is 50 Dollars.
H1 conversion headlights, no bulbs included, round for pre 82 first gen. 20 dollars.
Frame, looks to be in ok shape, has motor mounts cut off and replaced from a chevy vortec V6 swap. 50 dollars. You do all the wrenching to remove parts not wanted.
I'm keeping the cab.






Thread
Thread Starter
Forum
Replies
Last Post
MMA_Alex
86-95 Trucks & 4Runners (Build-Up Section)
25
Apr 18, 2017 05:07 AM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
Jul 6, 2015 04:07 AM



