WTB[GreatLakes]: Airbox from a 3.4l Taco/runner
10-22-2017, 07:17 AM
#1
Registered User
Thread Starter
Join Date: Nov 2015
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Airbox from a 3.4l Taco/runner
Hey guys. Looking for an airbox from a 3.4 liter engine. The square one with the inlet that points toward the passenger fender.
Looks like this one: *photo (stolen from another forum)*
http://i716.photobucket.com/albums/w...b.jpg~original
Looks like this one: *photo (stolen from another forum)*
http://i716.photobucket.com/albums/w...b.jpg~original
11-14-2017, 06:28 PM
#3
Contributing Member
This may be relevant...or not:
The one pictured looks like a 99-02 , the 96-98 has a different style big maf that fits into the box, the 99-02's smaller maf fits into the tube that is attached to the box. The intake tubes between the styles are different length too if it matters. Other than the maf section they are the same. I've found both kinds at the junkyards, if you have that option.
Sorry about the late info, didn't see the thread til today.
The one pictured looks like a 99-02 , the 96-98 has a different style big maf that fits into the box, the 99-02's smaller maf fits into the tube that is attached to the box. The intake tubes between the styles are different length too if it matters. Other than the maf section they are the same. I've found both kinds at the junkyards, if you have that option.
Sorry about the late info, didn't see the thread til today.
Last edited by habanero; 11-14-2017 at 06:30 PM.
12-02-2017, 03:34 PM
#4
Contributing Member
Join Date: Dec 2002
Location: The Lone Star State
Posts: 2,424
Likes: 0
Received 0 Likes
on
0 Posts
What year do you need? I have one from my '01 that has fairly new rubber end pieces on it. I replaced them for about $75 then switched to an Air Raid. I'll send it to you for $60 shipped to the lower 48.
