I imagine the majority of T100 conversation is for 1995.5 to 1998 3.4L's. (Not to dismiss the pre 95 t-100's) Just wondering where to look for my fix of Yotatech.
thanks

 

hmmm dont know where youd fit in.... you make a good point, sounds like there needs to be a home for T-100 owners....

 

Wasn't the T100 listed in one of the categories before?
I liked it better before the recent changes. Now it's a crapshoot if you have a question whether folks who can help will see it. Just because you have say, an 85 question doesn't mean the guy who can help has one too, he might be over on the 3rd gen forum... Seems there was more 'discussions' before.

 

What year were the Ts produced?
Right now they are listed under the 89 to 95 rigs.
https://www.yotatech.com/forums/forumdisplay.php?f=60

 

I thought about this a little while ago.

The T100s fit into both catagories depending on which engine you have. The suspension and underpinnings are based on the trucks and 2nd gen 4runners, while the engine can be a 2.4L 4cyl, 3.0L V6 or the 3.4L V6.

My suggestion would be to post in the tacoma/3rd gen 4runner forum if it's a question about a 3.4L engine/Tranny and post in the older truck/4runner forum if its about anything else.

 

That sounds like a plan...

 

93 - 98.

The trouble with them as forums go is that they share amounts of design with both pre and post 95 rigs.

 

my T100 is a 1999.5 (july)with a 5vzfe 3.4L. I always thought it shared more in common with the 3rd gen. 4 runners and 98 vintage of Tacoma's. Robinhood pointed out the suspension was based on the 2nd gen. 4runners. My thought is to dump the sequoia, landcruiser, T100, and Tundra into a catchall catagory, just to get some discussion going again.
.02 greg

 

I would agree... too far diversified, and not enough discussions.