98 4 Runner rear bumper build
#1
98 4 Runner rear bumper build
I just finished phase 2 of my bumper build and just have some final trim pieces and tire carrier to finish. check out my photo bucket with pics of my build up and let me know what you think so far.
http://s686.photobucket.com/albums/vv222/ressoldier/
here is a pic to get you thinking.
http://s686.photobucket.com/albums/vv222/ressoldier/
here is a pic to get you thinking.
#4
with the receiver hitch I was way to low in the back and kept dragging on rocks and transitions. Since i wanted to retain a receiver and increase departure angle a rear bumper was the only choice. I mounted it using the factory receiver hitch bolts so I know it is strong enough.Also there arent to many choices out there for the rear. now the front bumper you have a choice of some really good looking ones so not really a need to come up with my own design.
Trending Topics
#8
I might be interested, however I still have not been able to find the time to finish my swing away. I would not want to commit to someone a product and not be able to deliver.
#10
Sides are 1/8 Plate steel with 1" square tube perimeter and the support piece going to frame from front is 1x2. The main rear piece is 2x3x3/16 steel tube and frame brackets are 4x4x1/4 angle steel guessing about 65-75lbs but will weigh it next time i have it off for the swing away build
Thread
Thread Starter
Forum
Replies
Last Post
stagger_lee
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
6
03-29-2016 06:27 PM
dirtrider0129
Buying & Selling Advice - Feeler/Gauging Interest
10
06-24-2015 12:24 PM