Pro Comp 33311 Leafs on an 1987 4runner ???
07-24-2009, 10:05 PM
#1
Registered User
Thread Starter
Join Date: Jul 2009
Location: Texas
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Pro Comp 33311 Leafs on an 1987 4runner ???
[B]Does anybody know if the Pro Comp 33311 leafs would fit the rear end without modifications. They seem like they might be a cheap way to lift the rear end... Thanks for any advice you might be able to give!!!
Last edited by orionhones; 07-25-2009 at 07:31 AM.
07-28-2009, 07:23 AM
#2
Registered User
Thread Starter
Join Date: Jul 2009
Location: Texas
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
What I Found Out
No one has responded, but there seems to be a little interest in this matter, so I figured I would let those interested know that from what I have found out, it should work. I will let you know for sure after I put them on. May be a little while before I can, but I will update eventually.
08-08-2009, 11:00 AM
#3
Registered User
I did those springs they lift the rear up a lot.
My old bushings and bolts were hosed so I drilled the rear forward hanger to accept a larger bolt. Other than that no rear mods to put them in.
You need either 1.5" ball joint spacers in the front or a 4" lift. Mine sat pretty racked with a stock front end.
This is how mine sit with SAS and some 3" front springs.
My old bushings and bolts were hosed so I drilled the rear forward hanger to accept a larger bolt. Other than that no rear mods to put them in.
You need either 1.5" ball joint spacers in the front or a 4" lift. Mine sat pretty racked with a stock front end.
This is how mine sit with SAS and some 3" front springs.
Last edited by 934rnr; 08-08-2009 at 11:14 AM.
Thread
Thread Starter
Forum
Replies
Last Post
tpd143
General Vehicle Related Topics (Non Year Related)
1
07-07-2015 09:06 AM
