new upper or lower control arms with HD spring lift (1.5") ?
#1
Registered User
Thread Starter
Join Date: Feb 2003
Location: seattle
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
new upper or lower control arms with HD spring lift (1.5") ?
I am ready to lift my sagging rear and i noticed on all pro offroad's websight that they sell tougher and longer control arms. I didn't know if these are necessary or just extras....i'm not planning on doing any really serious offroading and am probably going to stick with my 31x10.5" tires at least until i get a real job................thanks for the input
#2
All you need to lift your sagging rear is a new pair of coil springs - from Downey, OME, or Performance Products. The two most popular brands on here are Downey and PP. The only other necessary mod at the time will be to relocate your brake proportioning valve, and the bracket to do that is included with the Downey kit. I have had the Downey Heavy Duty coils on my rig for 2 years and have not had a single problem - they are still my favorite mod to date. Let us know if you need anything else.
#3
Registered User
Thread Starter
Join Date: Feb 2003
Location: seattle
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
thanks..............
the reason i asked about the control arms was that on all pro's web page they said "Lifted 4Runners with coil suspension and lots of travel can have problems with the factory upper control arm brackets tearing away from the axle housing."
http://www.allprooffroad.com/pics/rearcoil/crack.jpg
thanks for the input...much appreciated!!
http://www.allprooffroad.com/pics/rearcoil/crack.jpg
thanks for the input...much appreciated!!
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: Toyota collection part out
88sasturbotoy
Axles - Suspensions - Tires - Wheels
2
08-11-2015 01:56 AM
kirkrunner
86-95 Trucks & 4Runners
2
07-27-2015 07:59 PM
FS[SouthCent]: TX Third Gen UCA and LCA low miles Taco
KyleT
Axles - Suspensions - Tires - Wheels
1
07-21-2015 07:54 PM