Lift feedback.
#1
Registered User
Thread Starter
Join Date: May 2008
Location: Stockton California
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Lift feedback.
So I'm going to put some new suspension in my 98 4 runner. I'm thinking 882's up front with OME soft ride shocks and LC coils in the rear. If I remember correctly for the LC coils I need coils out of a 95 for the rear correct? I'm wanting to get around 4" of rear lift as I will be adding some weight in the back. I'm currently running BFG M2 KM2 MT's 255/85/r16. Fender wells are chopped out and it only rubs at full stuff a little bit. Anyways I have a 4 cylinder and I want to go to 35's with new suspension but I'm thinking 35"s might be a bit to much with the gearing my 4 cyl has? Is this correct? Thanks fellas.
#3
Registered User
Thread Starter
Join Date: May 2008
Location: Stockton California
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
#5
Registered User
Thread Starter
Join Date: May 2008
Location: Stockton California
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Will the 881's hold up to a bumper and winch? Thats the dilemma I was going to get the lift on before I had the bumper and bumper was next...
#6
Registered User
Thread Starter
Join Date: May 2008
Location: Stockton California
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Just realized the 881's only give a advertised 2.5 of lift... I planned on going with 882's up front with the diff drop and LC coils in the rear until I got the bumper in two months at most.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Vendors Build-Ups (Build-Up Section)
0
09-05-2015 06:52 PM
joeynational
86-95 Trucks & 4Runners
1
09-05-2015 01:54 PM