1983 First Gen
#1
Registered User
Thread Starter
Join Date: Apr 2017
Location: Oregon
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
1983 First Gen
1983 yota, PO spilt gas down the side, might as well do that to the whole truck, at least I wouldn't have to sand it down
PO installed a 37 gallon fuel tank
20r head, 22r block.
Rebuilt motor -- 500 miles on it
PO cut and tied the seat belt on the drivers side to only go across the waist... why? I don't know.
Diamond plate head liner and cracked dash.
Terribly uncomfortable "racing seats"
Diamond Plate door panels painted black
Pictures of my new first gen before I have started any work on it.
PO installed a 37 gallon fuel tank
20r head, 22r block.
Rebuilt motor -- 500 miles on it
PO cut and tied the seat belt on the drivers side to only go across the waist... why? I don't know.
Diamond plate head liner and cracked dash.
Terribly uncomfortable "racing seats"
Diamond Plate door panels painted black
Pictures of my new first gen before I have started any work on it.
Last edited by firstgenjo; 04-09-2017 at 12:03 PM. Reason: Photos didn't show up
#3
pics are showing up now, at least for me.
it never ceases to amaze me to see what people have done to trucks...diamond plate headliner...wow..
of course a few people have wondered WTF i did a few times too
you have a project on your hands
you should take the truck into your local police department, looks like a few bodily fluids might show up under one of their cool flashlights...
it never ceases to amaze me to see what people have done to trucks...diamond plate headliner...wow..
of course a few people have wondered WTF i did a few times too
you have a project on your hands
you should take the truck into your local police department, looks like a few bodily fluids might show up under one of their cool flashlights...
#4
Registered User
Thread Starter
Join Date: Apr 2017
Location: Oregon
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Yeah it's a project and my daily for now I have a parts 81 with full interior just swapped in the bench seat shift knob and some other miscellaneous pieces I'll swap everything over on the weekend when I have the time
#5
Registered User
iTrader: (1)
Join Date: Oct 2010
Location: N of Okechobee Florida
Posts: 1,002
Likes: 0
Received 4 Likes
on
4 Posts
Pretty cool. Looks alot like the 80 i just aquired. Have you moved thay fuel cell? Im just curious to see if the front of the bed is rusyed as bad as mine. Keep the posts coming, theres not enough first gens on here anymore
Trending Topics
#8
Registered User
iTrader: (2)
Welcome to Yotatech.
It's amazing what some of the PO's do to these trucks. I've had three 83's, on one of them they attempted to install a sunroof, cut the hole the wrong size so all 4 corners leaked and then attempted to bondo over the entire mess, glass and all, lol. Wow 37 gallons, I bet you can really put some miles on it between fuel ups! You're making some good progress, keep up the good work!
It's amazing what some of the PO's do to these trucks. I've had three 83's, on one of them they attempted to install a sunroof, cut the hole the wrong size so all 4 corners leaked and then attempted to bondo over the entire mess, glass and all, lol. Wow 37 gallons, I bet you can really put some miles on it between fuel ups! You're making some good progress, keep up the good work!
#10
Registered User
Thread Starter
Join Date: Apr 2017
Location: Oregon
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Clutch was slipping so bad that I could barely drive it across town
Got the tranny unbolted and dropped down
Tranny is out and I cleaned it up a bit, throwing it back in tomorrow.
Got the tranny unbolted and dropped down
Tranny is out and I cleaned it up a bit, throwing it back in tomorrow.