Tacoma: T-case brake, beefy skid, quick disconn., door hinges, tail lights, mirror
#1
Registered User
Thread Starter
Join Date: Jan 2004
Location: Maryland
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Tacoma: T-case brake, beefy skid, quick disconn., door hinges, tail lights, mirror
I have for sale:
1 ballistic fab t-case brake for tacomas. It is used and would still be on the truck if I hadn't bought an inchworm lefty t-case.
I had issues w/it holding so I did the mod where people cut the arm down a bit and run an additional rod with a heim back to the stock parking brake as shown in this pic for more leverage.
This pic isn't my truck but it is what I did w/mine.
Here are pics of my t-case brake that is for sale:
It is so greasy cause the driveshaft likes to fling grease on it right after you lube it but it will clean up better.
Here is a link to the product on their site:
http://www.ballisticfabrication.com/...p_94-1340.html
$125 plus shipping
I also have a beefy skid plate I made out of 1/4" steel for a stock tacoma t-case.
$50 plus shipping (it's heavy)
I have a full set of Tacoma door hinges. I was going to use them for my 1/2 doors but never got around to it and am moving now.
$40
I have a set of Quick disconnect door pins that allows you to modify the hinges so that doors can be removed by pulling 2 pins per side. They are made by timberwolf and are never even installed. Here is a post to a dude who put some on w/pics:
http://www.tacomaterritory.com/forum...ick+disconnect
$15
I also have a drivers side mirror assembly w/glass that looks like this:
$15
Finally I have a pair of 95-00 tail lights in good condition. I'm sure you guys know what those look like. $35
1 ballistic fab t-case brake for tacomas. It is used and would still be on the truck if I hadn't bought an inchworm lefty t-case.
I had issues w/it holding so I did the mod where people cut the arm down a bit and run an additional rod with a heim back to the stock parking brake as shown in this pic for more leverage.
This pic isn't my truck but it is what I did w/mine.
Here are pics of my t-case brake that is for sale:
It is so greasy cause the driveshaft likes to fling grease on it right after you lube it but it will clean up better.
Here is a link to the product on their site:
http://www.ballisticfabrication.com/...p_94-1340.html
$125 plus shipping
I also have a beefy skid plate I made out of 1/4" steel for a stock tacoma t-case.
$50 plus shipping (it's heavy)
I have a full set of Tacoma door hinges. I was going to use them for my 1/2 doors but never got around to it and am moving now.
$40
I have a set of Quick disconnect door pins that allows you to modify the hinges so that doors can be removed by pulling 2 pins per side. They are made by timberwolf and are never even installed. Here is a post to a dude who put some on w/pics:
http://www.tacomaterritory.com/forum...ick+disconnect
$15
I also have a drivers side mirror assembly w/glass that looks like this:
$15
Finally I have a pair of 95-00 tail lights in good condition. I'm sure you guys know what those look like. $35
#4
Registered User
Thread Starter
Join Date: Jan 2004
Location: Maryland
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
I'm in Pittsburg, KS
I am not 100% on the runner but if it is similar to the tacoma I don't see why it wouldn't. I'll drop the price to $40
Not sure but price drop to $100, get it out of my garage!
I am not 100% on the runner but if it is similar to the tacoma I don't see why it wouldn't. I'll drop the price to $40
Not sure but price drop to $100, get it out of my garage!
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
jasonty
Pre 84 Trucks (Build-Up Section)
41
12-23-2018 01:00 PM
BeMiceElf
Misc Stuff (Vehicle Related)
7
10-10-2015 09:40 PM
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM
Johntom240
General Electrical & Lighting Related Topics
7
07-13-2015 12:18 AM