coolant bleeder
#1
Registered User
Thread Starter
Join Date: Aug 2009
Location: Eugene, Oregon
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
coolant bleeder
so, I have a huge air pocket stuck in my coolant system, is ther some sort of bleeder screw on the head or something , to bleed the air while I'm filling the system
#2
Registered User
Join Date: Dec 2008
Location: San Diego
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
I've done this to my swap, but actually isn't running 100% yet. as i still need to work out a few bugs, and open headers doesn't help either. =0
dntsdad's picture
http://home.comcast.net/%7Edntsdad/102_4624.jpg
You see the tee-connector, I have mine going to a hose with a bolt in it. So if i need to bleed excess air, i can use that. in theory.
Also try burping the system with the radiator cap open... While warming up. You should see bubbles coming out.
dntsdad's picture
http://home.comcast.net/%7Edntsdad/102_4624.jpg
You see the tee-connector, I have mine going to a hose with a bolt in it. So if i need to bleed excess air, i can use that. in theory.
Also try burping the system with the radiator cap open... While warming up. You should see bubbles coming out.
#3
Registered User
Thread Starter
Join Date: Aug 2009
Location: Eugene, Oregon
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
i have a T on my heater hose, I ended up just filling the sysem from there.
I just need to re register this thing, It ready to drive now. thanks y'all
I just need to re register this thing, It ready to drive now. thanks y'all
Thread
Thread Starter
Forum
Replies
Last Post
LittleUgly
86-95 Trucks & 4Runners (Build-Up Section)
15
01-02-2020 01:30 PM
kcaudill
86-95 Trucks & 4Runners
19
10-10-2015 02:39 PM