Countryhick

I have the o2 sensors and the wires off the harness EXCEPT

The wires are cut right at the motor and i need to resplice them into it i have a complete wiring diagram. Problem is.

The o2 sensors up stream n down stream both have a solid brown wire. And a white /w blue stripe. Which makes me confused on doing the wiring. except.

both brown wires meet up before they hit the ecu. Both white n blue meet up before the ecu. But do they send the same signals?

Whos got ideas for me or answers if im right that it shouldnt matter which matching wires i hook up?

Countryhick

32views !! no answer?

dntsdad

they are just power and ground for the sensors. You can join them.

sixstringslut

Kind of confused b/c most I have seen are four wire O2 sensors. If just two then should not be a problem tying together same colors.

dntsdad

they are 4 wire........at least mine are. Power, ground, heated feed, O2 data to ecm.

Countryhick

I meant 4 matching colors I know how many they have thanks guys I figured out yesterday power n ground