Toyota needs body work...
#21
Registered User
Thread Starter
If that shows the true color at all (the photo), that looks really good. Thank you...hadn't gotten to page 8, yet. The Home Depot here even has that color....they will make any color Rustoleum offers, too. Lucked out on that one! I read not all HD's will do that. The Lowe's here won't, nor do have the choices HD has. I might add, HD (atleast this one) will match and beat Lowe's prices by 10%...for anyone interested.
Last edited by thook; 02-12-2007 at 12:17 PM.
#24
Registered User
Join Date: Jan 2007
Location: Mississauga, Ontario, Canada
Posts: 1,054
Likes: 0
Received 1 Like
on
1 Post
Sent you an e-mail with all the pics. Here's a few for everyone else.
I have no before pics cause I didn't take them so the first pics are after all the body work was done and it was primed.
Painted!
I have no before pics cause I didn't take them so the first pics are after all the body work was done and it was primed.
Painted!
#25
Registered User
Thread Starter
Hey Anthony,
Thanks for sending the pics. You know, you did a great job. I wonder....were you building up a rusted area with that aluminum flashing? I had actually thought of doing something like that where the fenders had rusted away over the wheels...then build over it with fiberglass. What do you think? Would the fiberglass adhere to it?
Thanks for sending the pics. You know, you did a great job. I wonder....were you building up a rusted area with that aluminum flashing? I had actually thought of doing something like that where the fenders had rusted away over the wheels...then build over it with fiberglass. What do you think? Would the fiberglass adhere to it?
#26
Registered User
Join Date: Jan 2007
Location: Mississauga, Ontario, Canada
Posts: 1,054
Likes: 0
Received 1 Like
on
1 Post
The fiberglass should adhere to it.
We used sheet metal, no aluminum flashing. Once it was screwed in place, I used some seam sealer and the coated the HELL out of it in underbody coating.
I'll be coating the hell out of my floor pans and frame with POR-15 on the 82. I'll take pics.
We used sheet metal, no aluminum flashing. Once it was screwed in place, I used some seam sealer and the coated the HELL out of it in underbody coating.
I'll be coating the hell out of my floor pans and frame with POR-15 on the 82. I'll take pics.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
Avenged
95.5-2004 Tacomas & 96-2002 4Runners
4
07-09-2015 07:55 AM
skoti89
Off Road Trip Planning, Expeditions, Trips, & Events
0
07-06-2015 07:45 PM