rowdy235

Well I'm fixing (or attempting to fix) my horn switches. However, I need to remove the steering wheel. I removed the nut but left it on a little ways, then I yanked and pulled and twisted and pushed, and my cousin did too and we can't seem to get the thing to budge. I borrowed a puller, but what size bolts fit the threaded holes on the wheel? Should be the same for all toyota pickups, but its on an 82.

DeathCougar

iTrader: (23)

m8x1.25 I believe

I have never had a steering wheel in a Toyota that I could not wiggle off, and I have taken off a few in my day. Wiggle it side to side while pulling back and it will pop off. Be sure to leave the nut on a few threads so you dont smack yourself in the face when it pops free.

rowdy235

well my back aches from attempting to get it off yesterday, I'll try that bolt size and if its a no go I'll give yanking another shot.