backspacing-fender flare fit?
#1
Registered User
Thread Starter
Join Date: Oct 2010
Location: VT
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
backspacing-fender flare fit?
Want to push out tires without using 2-3" wheel spacers. Have 3" fender flares and no longer running 33x12.5's. From the searches and getting back spaced on back spacing I think I would need around 6" back spacing, but what I have now and other wheels are about 4". Would it better to go with a smaller spacer and little wider tire then to compensate with back spacing. not sure of any where that sells cheaper steel wheels with lots of back spacing.
#5
Registered User
Thread Starter
Join Date: Oct 2010
Location: VT
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Was thinking about doing that, they are screwed in so id have to patch holes somehow Planning on running bigger/wider tires at some point but need to swap out gears (4.56 to 5.29) and not at that point yet. I got the flares for a good deal by trading my old clutch and trans, so I figured id run em. Had 12.5 wide tires then, running a more narrow tire now.
Thread
Thread Starter
Forum
Replies
Last Post
94toyy
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
12
09-14-2015 06:18 AM
justdifferentials
Vendors Build-Ups (Build-Up Section)
0
09-05-2015 06:52 PM