FS[SouthEast]: Misc Parts for Sale
#1
Registered User
Thread Starter
Misc Parts for Sale
First up, throttle position sensor
Part Number 89452-12040, for 89 and up 22re
I bought a throttle body with this TPS on it and I don't need it as 89+ won't work for my 4Runner. I checked it out with a meter on the bench (ie not installed on a throttle body) and VTA to E2 sweeps from 90Ohms to 5.5kOhms as I twist the pawl, IDL to E2 is 12Ohms with spring sitting idle, and then goes to infinite when I twist the pawl a bit. And finally Vcc to E2 is 6.17kOhms. From looking at the specs on 4Crawler TPS info, seems like these results are all to be expected, so I think this TPS is fine.
$45 plus shipping. $25 plus shipping
Cowl Vent screens. Found these in my pile, I already have a set installed, so no need for these.
$25 plus shipping
Grey front door sill trim pieces, $30 for the pair.
Original door cards from my 88 4Runner, unfortunately these were cut for speakers. $25 for pair, plus shipping.
Non SR5 passenger door card out of a junkyard 88 4Runner. Vinyl really in good shape, masonite backer board has a crack in it that you can see in the next pic. $20 plus shipping.
A few more things coming soon as I dig them out and decide whether I'm keeping them or not.
Part Number 89452-12040, for 89 and up 22re
I bought a throttle body with this TPS on it and I don't need it as 89+ won't work for my 4Runner. I checked it out with a meter on the bench (ie not installed on a throttle body) and VTA to E2 sweeps from 90Ohms to 5.5kOhms as I twist the pawl, IDL to E2 is 12Ohms with spring sitting idle, and then goes to infinite when I twist the pawl a bit. And finally Vcc to E2 is 6.17kOhms. From looking at the specs on 4Crawler TPS info, seems like these results are all to be expected, so I think this TPS is fine.
$
Cowl Vent screens. Found these in my pile, I already have a set installed, so no need for these.
$25 plus shipping
Grey front door sill trim pieces, $30 for the pair.
Original door cards from my 88 4Runner, unfortunately these were cut for speakers. $25 for pair, plus shipping.
Non SR5 passenger door card out of a junkyard 88 4Runner. Vinyl really in good shape, masonite backer board has a crack in it that you can see in the next pic. $20 plus shipping.
A few more things coming soon as I dig them out and decide whether I'm keeping them or not.
Last edited by coryc85; 09-04-2021 at 12:37 PM.
#2
Registered User
Thread Starter
Mercury Villager electric fan. Intended to convert to efan many years ago and so I ordered this fan from one of those LKQ part picker places. $25 plus shipping.
No rust slider window out of a 4Runner from out West. Bought this to replace one of my rusty sliders, but now that I have a softtop, this is probably never going to happen. $35 plus shipping.
No rust slider window out of a 4Runner from out West. Bought this to replace one of my rusty sliders, but now that I have a softtop, this is probably never going to happen. $35 plus shipping.
#4
Registered User
Thread Starter
Sent you a message Donovan, yes panels are still available.
Thread
Thread Starter
Forum
Replies
Last Post