hross14

One thing i would really like are Wheel Flares for those of use running 35's.

Mud and water go right up the side of the truck and if i drive to another state i will probably get a ticket......

Anyways--does anybody know of some big wheel flares? I dont really like the Glass fenders......

The ones on the Icelandic ice trucks would be slick--but they said they wouldnt sell them........

So what says you?

BigBluePile

iTrader: (3)

huh??

I had a big wheel once...pretty sure it didn't have any flares on it...


Do you mean like and extension to your fender to cover up wider tires as to not piss off the law?

dropzone

iTrader: (6)

I would say that you should bushwacker

BigBluePile

iTrader: (3)

I wish my big wheel had a flare....so much mud in the face.....

wd21_sr5

Garden edging

mcguire

hey there. im new to the site. im running 3" bushwacker cut outs on my 99 tacoma. we have a law not allowing tires stickin out more then 1.5". they did the trick for me

gary96360

in my area your not allowed to have any of the tire sticking out the fender. getting tired of mud flying into the cab beacuse of the tires

hross14

OK OK--Fender Flares

I looked at Bushwacker a while back and i didnt see any large ones for toyota 4runner. I will look again.

BigBluePile

iTrader: (3)

They're there...keep an eye on the board here. I scored a set for a good deal. I refuse to pay the full price for Bushwacker...concidering I plan on whacking them on the bushs/trees/rocks around here.

dannomite

I have never seen them for a third gen. The biggest is for 1.5" which is not much.

BigBluePile

iTrader: (3)

1.5" is better than nothing

brian2sun

Sweet handlebar tassles. I've been thinking of getting some bushwackers too. Do you know if they bolt-on and if so do they use the factory Limited or SR5 holes? (the Limited's holes are on the side of the body and the SR5's holes are underneath in the wheel well)

89 Frunner

Im kinda new here.. so I hope the pics work out, im running the bushwacker cut out flares, they have 2.5-3" tire coverage and they can be mounted in about 5 min per flare.
I literally JUST put mine on tonight, they are mounted with self tapping screw covered with black "button" caps, and can be riveted to the under lip of the wheel well.
If you have the rusties like my 89 has, you can trim the body and the flares cover quite a few inches of missing fender... sheeesh that sounds terrible, but it works. Now all I need to do it ditch the 10.5's

89 Frunner

Oh and btw... this is how much fender im missing under the flare, the front is worse :S and its covered. But if you dont want small screw holes in your fender these arent the flares you would want. Goodluck

hross14

I havent seen them for a 3rd gen 4runner--i need 3-4" flares.

So 89frunner--you are saying that you got some 2.5-3" bushwacker flares? I wonder what the difference in Arches is/are

I also wonder if i cant just measure the opening and have BW look up something in that size. I dont care about drilling holes and whatever so i can bolt them up.......

lastname_firstname

anybody know of anything that can cover 10" of wheel poke? Im looking @ a tacoma that has a dana 44 front and a chevy 14bolt rear and dude says the tires stick out 10 inches on each side

cpizzle42

I think I have wheel poke too! Is there a cure for massive wheel poke out there?!

lastname_firstname

Are the icelandic flares custom built? Are any of those peeps on yotatech or pirate?

donomite49

you check with any fiberglass guys to make a set of fenders with more than the usual 4" flare? have you seen http://www.hannemannfiberglass.com/c...57567&page=134

lastname_firstname

http://images.craigslist.org/5L85N45T43Gf3Fc3N2c5ec5db8b80cd7d1e11.jpg

Anybody know this guy?