revtek kit for 3rd gens
#1
Registered User
Thread Starter
Join Date: May 2002
Location: Richmond VA
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
revtek kit for 3rd gens
Heres I kit I saw looking for 2nd gen stuff on ebay. The parts look good to me. Hes asking 200bones.
http://cgi.ebay.com/ebaymotors/ws/eB...category=33585
http://cgi.ebay.com/ebaymotors/ws/eB...category=33585
#2
Contributing Member
Join Date: Jun 2002
Location: Murrieta, CA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
I think those are the ones that mojo_risin on the forum here is selling. Check this out.. https://www.yotatech.com/forums/show...&threadid=5493
#3
Registered User
Join Date: Nov 2002
Location: Thornton, CO.
Posts: 904
Likes: 0
Received 0 Likes
on
0 Posts
Yup, that's mine. I took off the Revtek lift and went to SAW's up front and Downey/Bilstien combo in the rear. I really enjoyed the Revtek - and at the time when I bought it (almost 2 years ago)was the least expensive way to lift my Runner. I know that in the near furture I will add a custom bumper and winch - so I wanted the adjustability of the SAW's up front.
And for the rear - My 4Runner fell under that rear suspension TSB - so the stock rear springs were way to soft and would bottom out with load in the back. So instead of having the dealer do the TSB - I just did it myself with new coils and shocks.
Mojo
And for the rear - My 4Runner fell under that rear suspension TSB - so the stock rear springs were way to soft and would bottom out with load in the back. So instead of having the dealer do the TSB - I just did it myself with new coils and shocks.
Mojo
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
anniesball
95.5-2004 Tacomas & 96-2002 4Runners
0
07-29-2015 11:46 AM