repin a 99 maf
#1
repin a 99 maf
Hi so I have read all the posts on swapping a 99 maf into my 97 4runner. I have all the parts what I do not know is how to repine the connector. I have were the pin need to go but how do you remove them. Is there a tool or technique to do this without distroying the connector
Thanks John
Thanks John
#4
Registered User
I did, not long ago, but the same .pdf is linked right at the top of Scuba's link.
EDIT: That link is in fact dead, so here is a good one:
http://wilbo666.pbworks.com/w/file/f...RM1022E%29.pdf
Otherwise, Scuba's link is a very useful primer on repinning. I can unlock those connectors with a jeweler's screwdriver, but it takes patience.
EDIT: That link is in fact dead, so here is a good one:
http://wilbo666.pbworks.com/w/file/f...RM1022E%29.pdf
Otherwise, Scuba's link is a very useful primer on repinning. I can unlock those connectors with a jeweler's screwdriver, but it takes patience.
Last edited by TheDurk; 04-01-2014 at 12:24 AM.
#6
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
Sam hain
95.5-2004 Tacomas & 96-2002 4Runners
19
09-30-2015 08:25 AM