Notices
95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

need some help.

Thread Tools
 
Search this Thread
 
Old 07-12-2007, 02:27 PM
  #1  
Registered User
Thread Starter
 
hatchbox's Avatar
 
Join Date: Dec 2006
Location: Virginia Beach
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
need some help.

1996 Toyota tacoma,
4wd V6

About a month ago, it through a check engine light. No symptoms, just erased the code, and it stayed off till 2 days ago.
Then today on the highway i came to a stop and they engine idled at 3k. Even if i kept the clutch in.
Stopped and popped the hood and the ground from the battery to the chasis snapped.
Did i fry a sensor?

Checked the codes its throwing 3

*P0110 Intake air temp circuit malfunction.
*P0120 TPS/ Petal position sensor. Sensor A Ciruit Malfunction.
*P0510 Closed Throttle Postion Switch.

Tried a autozone TPS
Tried a known working mass air flow sensor.
No luck.

Any ideas?
Old 07-12-2007, 02:31 PM
  #2  
Registered User
 
blink's Avatar
 
Join Date: Oct 2003
Location: Scottsdale, AZ
Posts: 275
Likes: 0
Received 0 Likes on 0 Posts
Id check and clean all your grounds. I know on my taco, I had a loose ground that caused the ecu to throw weird codes and run poorly.
Old 07-25-2007, 06:51 PM
  #3  
Registered User
Thread Starter
 
hatchbox's Avatar
 
Join Date: Dec 2006
Location: Virginia Beach
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by blink
Id check and clean all your grounds. I know on my taco, I had a loose ground that caused the ecu to throw weird codes and run poorly.
Checked grounds,
swapped out maf, tps. cleaned throttle body.

Could this be a IACV problem? If so how would i clean/adjust it and where is it located?
Old 07-26-2007, 01:32 PM
  #4  
Registered User
Thread Starter
 
hatchbox's Avatar
 
Join Date: Dec 2006
Location: Virginia Beach
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by hatchbox
Checked grounds,
swapped out maf, tps. cleaned throttle body.

Could this be a IACV problem? If so how would i clean/adjust it and where is it located?
Nothing?
Old 07-31-2007, 04:45 PM
  #5  
Registered User
Thread Starter
 
hatchbox's Avatar
 
Join Date: Dec 2006
Location: Virginia Beach
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
http://www.4crawler.com/4x4/CheapTricks/TPS/index.shtml

Just did that tests. I know i dont have a 95, but a 96.

But i should have continuity from IDL - Ground with throttle closed right?
I have battery voltage at that wire, but no countinuty from IDL to ground. With the throtlle in any position.
Old 08-04-2007, 06:42 PM
  #6  
Registered User
Thread Starter
 
hatchbox's Avatar
 
Join Date: Dec 2006
Location: Virginia Beach
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
anything at all?
Old 06-30-2010, 05:58 AM
  #7  
Registered User
 
Runnerfan's Avatar
 
Join Date: Jun 2009
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
Did you ever solve the issue? What was it? How did you fix it?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
zytra
86-95 Trucks & 4Runners
32
01-24-2019 03:16 PM
Firefightersink15
86-95 Trucks & 4Runners
17
11-23-2015 10:32 PM
Shagool22
86-95 Trucks & 4Runners
4
09-28-2015 07:53 PM
fountain
86-95 Trucks & 4Runners
6
09-28-2015 03:04 AM
LotOMiles
95.5-2004 Tacomas & 96-2002 4Runners
8
09-14-2015 11:45 PM



Quick Reply: need some help.



All times are GMT -8. The time now is 04:30 PM.