Grinding from clutch/trans area
#1
Grinding from clutch/trans area
Hey all, I have a '99 Tacoma 6 cylinder, 3.4L, manual transmission. 284K miles, had a new clutch put in about a year ago.
With the engine running, in neutral through 3rd gear, there is a repetitive, metallic grinding sound, like schuck...schuck...schuck...schuck, about 4 or 5 times per second while in neutral. Its frequency increases as I increase RPMs. It goes away with the clutch disengaged (pedal down). I can't hear it once I get up to 4th-5th gear.
I put new trans oil in about 18 months ago.
Any ideas?
With the engine running, in neutral through 3rd gear, there is a repetitive, metallic grinding sound, like schuck...schuck...schuck...schuck, about 4 or 5 times per second while in neutral. Its frequency increases as I increase RPMs. It goes away with the clutch disengaged (pedal down). I can't hear it once I get up to 4th-5th gear.
I put new trans oil in about 18 months ago.
Any ideas?
Thread
Thread Starter
Forum
Replies
Last Post
zytra
86-95 Trucks & 4Runners
32
01-24-2019 03:16 PM