is this 3vze a good deal?
09-29-2003, 11:06 PM
#1
Contributing Member
Thread Starter
Join Date: Apr 2003
Location: San Francisco
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
is this 3vze a good deal?
someone is offering to sell me their 3vze with 160k for $500... does that sound like a good deal? apparently the motor is running perfectly...
on the other hand, i don't really know what i'd do with an extra 3vze seeing as how my current 3vze is working good. I'd probably just take it apart and try to rebuild it for the experience.
on the other hand, i don't really know what i'd do with an extra 3vze seeing as how my current 3vze is working good. I'd probably just take it apart and try to rebuild it for the experience.
Last edited by ByThaBay; 09-29-2003 at 11:07 PM.
09-29-2003, 11:14 PM
#2
Banned
Join Date: Jul 2003
Location: White Mountains, Arizona (Yes it does snow in AZ)
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
Never hurts to have another engine (re-built-up) lying around! $500 for a 160k 3.0 doesn't sound to bad. If even for the re-build experience.
09-30-2003, 06:25 AM
#3
Contributing Member
Join Date: May 2002
Location: Connecticut
Posts: 970
Likes: 0
Received 0 Likes
on
0 Posts
At a yard in Mass, a used with around 125ish will bring $1500-$2000 
Sounds like a good deal, I would put it on a stand, tear it down.. Send the block to be honed/bored and magnafluxed and rebuild the bottom end yourself. Then send the heads out for a full re-build and bolt it togather..
Sounds like a good deal, I would put it on a stand, tear it down.. Send the block to be honed/bored and magnafluxed and rebuild the bottom end yourself. Then send the heads out for a full re-build and bolt it togather..
09-30-2003, 08:52 AM
#4
Registered User
Join Date: Dec 2002
Location: currently at large
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Firefyter-Emt
At a yard in Mass, a used with around 125ish will bring $1500-$2000 Sounds like a good deal, I would put it on a stand, tear it down.. Send the block to be honed/bored and magnafluxed and rebuild the bottom end yourself. Then send the heads out for a full re-build and bolt it togather..
At a yard in Mass, a used with around 125ish will bring $1500-$2000
Sounds like a good deal, I would put it on a stand, tear it down.. Send the block to be honed/bored and magnafluxed and rebuild the bottom end yourself. Then send the heads out for a full re-build and bolt it togather..
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM
WTB[PacNorWest]: WTB - Tacoma/4runner 3.4 Charcoal canister and igniter
94whiterunner
Items Wanted
0
07-12-2015 07:15 PM
