Jaino's '92 Single cab build
#1
Registered User
Thread Starter
Jaino's '92 Single cab build
Hey all! I'm starting another build thread to document my engine rebuild for a truck I recently purchased. June 24I bought another Toyota truck, a 1992 single cab 4 cylinder.
The truck is very clean for its age, its even got the stock Toyota deck!
Truck has 580000 right now with a bad headgasket; doesnt overheat, but slightly blowing white smoke when I drive it.
Overall purpose of this truck/ build will be for a comfortable and reliable DD, yet with a little offroad prowess added to the mix.
I am planning to get the engine rebuilt by 22RE Performance in Chico,CA. That is the first thing that I am currently doing. I really want to go with a Stage 2 build, but I am strapped for cash. If there is anyone that has done the Stage 1 and you're reading this, let me know how much power increase you got over stock. I have read a couple of threads about the Stage 2 so I have a little background knowledge on the Stage 2; I just cannot seem to find any info on the Stage 1 though.
First things first a little Toyta-in-the-dirt shot. lol
The truck came with a set of relatively new 31" Falken Rocky Mountains. IN my opinion these tires look way better than the BFG All TerrainsI recently painted the rims black and repacked my hubs with grease. Baby steps. haha
The truck is very clean for its age, its even got the stock Toyota deck!
Truck has 580000 right now with a bad headgasket; doesnt overheat, but slightly blowing white smoke when I drive it.
Overall purpose of this truck/ build will be for a comfortable and reliable DD, yet with a little offroad prowess added to the mix.
I am planning to get the engine rebuilt by 22RE Performance in Chico,CA. That is the first thing that I am currently doing. I really want to go with a Stage 2 build, but I am strapped for cash. If there is anyone that has done the Stage 1 and you're reading this, let me know how much power increase you got over stock. I have read a couple of threads about the Stage 2 so I have a little background knowledge on the Stage 2; I just cannot seem to find any info on the Stage 1 though.
First things first a little Toyta-in-the-dirt shot. lol
The truck came with a set of relatively new 31" Falken Rocky Mountains. IN my opinion these tires look way better than the BFG All TerrainsI recently painted the rims black and repacked my hubs with grease. Baby steps. haha
Last edited by Jaino240; 08-09-2012 at 02:10 PM.
#2
Registered User
Thread Starter
Almost forgot, I drove up to Chico yesterday and talked to Jim. Super laid back guy, awesome customer service. He made time to talk to me about what engine setup I should go with and that it would be a better idea for me to have him rebuilt my motor since it is an original block that hasnt been tampered with. I am planning to go with a stage 2 engine. I will be pulling out mine and dropping it off in about a month or so; trying to save up still. lol
#6
Registered User
Thread Starter
The silver single cab I sold to a guy in Elk Grove. He SAS-ed it and now its on CL! lol
And my old black extra cab, my brother has it now as DD and hunting truck.
And my old black extra cab, my brother has it now as DD and hunting truck.
#7
Registered User
Thread Starter
A little progress on the tear down.
And this is how she sits right now.
Almost done with the tear down excpet the two tranny bolts on top, closest to the firewall. I also need an engine hoist and leveler. Hoping to pull the motor by next Friday. Its another week, but Firday is the only day that I am off. lol
And this is how she sits right now.
Almost done with the tear down excpet the two tranny bolts on top, closest to the firewall. I also need an engine hoist and leveler. Hoping to pull the motor by next Friday. Its another week, but Firday is the only day that I am off. lol
Trending Topics
#8
Registered User
Thread Starter
A little update, got off on Thursday and went straight to Harbor Freight and bought an engine hoist. Got her assembled and ready for Fridays job.
Getting ready to pull out, double check everything!
I was in the process of rocking the engine, trying to get it to disconnect from the tranny and I realized there was a small ground wire that is boltedf from the firewall to the engine block.
Here it is pulled out and ready to be put on the stand.
Empty bay, I have a crap load to clean. by the time I get my engine back, the engine bay should be nice and clean!
Here it is, next Friday pulling pullys off and stripping it down then its to Putneys Custom machine she goes! Cannot wait.
As she sits until next Friday.
I will also be getting my intake manifold, injectors rebuilt. Along with that will be a a big bore throttle body, new OEM clutch and throwout bearing. Mind as well go all out. lol
Getting ready to pull out, double check everything!
I was in the process of rocking the engine, trying to get it to disconnect from the tranny and I realized there was a small ground wire that is boltedf from the firewall to the engine block.
Here it is pulled out and ready to be put on the stand.
Empty bay, I have a crap load to clean. by the time I get my engine back, the engine bay should be nice and clean!
Here it is, next Friday pulling pullys off and stripping it down then its to Putneys Custom machine she goes! Cannot wait.
As she sits until next Friday.
I will also be getting my intake manifold, injectors rebuilt. Along with that will be a a big bore throttle body, new OEM clutch and throwout bearing. Mind as well go all out. lol
Last edited by Jaino240; 08-19-2012 at 07:35 PM.
#9
Registered User
Thread Starter
A little update, I dropped the engine at Putneys today. Had a chance to talk to Jim more about the Stage 2. Awesome customer service again; I was able to tour his shop with him. He explained to me why he uses the parts he uses, and trust me, this guy knows what hes talking about.
Not only does he do 22re's he is also VERY familiar with the 2nd gen MR2's 3sgte! wow. Another amzing engine that Toyota made.
Any hoo, as I wait for my motor I will be cleaning all the brackets and whatnot, going to start scrubbing the engine bay tmo, make it nice and shiny. haha
Not only does he do 22re's he is also VERY familiar with the 2nd gen MR2's 3sgte! wow. Another amzing engine that Toyota made.
Any hoo, as I wait for my motor I will be cleaning all the brackets and whatnot, going to start scrubbing the engine bay tmo, make it nice and shiny. haha
#11
Registered User
Thread Starter
Thanks man. I was just going to do the HG and timing chain, but at 500 plus thousand miles, I just told myself do everything one time and be good for another 500,000 mi. Hopefully everything is smooth sailing for you as well when you start your build.
#12
Registered User
Thread Starter
Havent done anything to the truck except cleaning here and there. Just barely started cleaning the brackets and whatnot. Hand scrubbed the firewall and a little of the engine bay. I dont have a pressure washer so all the cleaning is done by hand. lol Anyways here are some pics of the engine bay. lol Nothing to brag about, but here goes anyways!
Last edited by Jaino240; 09-13-2012 at 05:05 PM.
#13
Registered User
Thread Starter
Got a little more done yesterday, cleaned and painted various brackets and the pulleys.
One thing I learned from my last engine build, was you have to stay organized. re-organized my work space as well. haha
One thing I learned from my last engine build, was you have to stay organized. re-organized my work space as well. haha
#16
Registered User
Thread Starter
Grego: Thank you and that beach blanket was put there so I wouldnt be banging parts in the fender. It was what I could find at the time. haha
Spacejunk: how are you man! lol
My brother has the black truck now, although he isnt doing much to it. lol
Yeah, I've been wanting to go to P. City too. Maybe when I get the engine done, we can all meet up and do some wheelin at P. City together.
Spacejunk: how are you man! lol
My brother has the black truck now, although he isnt doing much to it. lol
Yeah, I've been wanting to go to P. City too. Maybe when I get the engine done, we can all meet up and do some wheelin at P. City together.
#18
Registered User
Thread Starter
LOL yessir it is. The two bolts were found near my IFS housing covered in dirt, so i'm thinking they may have been there for awhile. I'm saving them just in case haha
#19
Registered User
Join Date: Sep 2012
Location: Bay Minette AL., (Lower right limb of Alabama)
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Buddy I love the look of that camper top! I really want to find one for my 94 ext cab but the wife totally disagrees lol. She claims it will look like a "grandpa's" truck lol. Anyways, yours looks great lol
-- And best of luck with your rebuild!! Im at 330k right now and hoping for that 500 lol
-- And best of luck with your rebuild!! Im at 330k right now and hoping for that 500 lol
#20
Registered User
Thread Starter
Thanks GTB.
I know what you mean by the grandpa look, my gf also said the same thing with my previous truck until we went snow camping with the shell off. haha
Lets just say she shows much more appreciation for the shell now.
I know what you mean by the grandpa look, my gf also said the same thing with my previous truck until we went snow camping with the shell off. haha
Lets just say she shows much more appreciation for the shell now.