95 Pickup Wheel Question...HELP!!!
#1
95 Pickup Wheel Question...HELP!!!
I have a 95 SR5 Pickup (4x4) that currently has a 4" lift and 33x12.50 TSL's on 15x10 rock crawler black steel wheels.
I want to go back to a stock wheel with a 33x10.50 BFG AT.
I bought some wheels from craigslist that came off of a 2002(ish) tacoma, but when i tried to put them on the front they barely went over the hubs (really tight fit) and once on they rubbed the upper control arm.
these are the ones i bought and dont work:
i assume that the backspacing is too much...but im not sure.
i would really like to know the backspacing of the stock wheels that came on the 95 Pickup so i could find some newer style stock wheels that would work.
id love it if i could find this style that would work:
any ideas or help would be rad. if you are just gonna tell me to use the search button, or that i should go measure something...dont...i have searched high and low. and that kind of talk dosent help much.
I want to go back to a stock wheel with a 33x10.50 BFG AT.
I bought some wheels from craigslist that came off of a 2002(ish) tacoma, but when i tried to put them on the front they barely went over the hubs (really tight fit) and once on they rubbed the upper control arm.
these are the ones i bought and dont work:
i assume that the backspacing is too much...but im not sure.
i would really like to know the backspacing of the stock wheels that came on the 95 Pickup so i could find some newer style stock wheels that would work.
id love it if i could find this style that would work:
any ideas or help would be rad. if you are just gonna tell me to use the search button, or that i should go measure something...dont...i have searched high and low. and that kind of talk dosent help much.
#2
first and second picture that didn't work:
http://s672.photobucket.com/albums/v...ent=Tires2.jpg
http://s672.photobucket.com/albums/v...ALY69346U1.jpg
http://s672.photobucket.com/albums/v...ent=Tires2.jpg
http://s672.photobucket.com/albums/v...ALY69346U1.jpg
Last edited by heliyota; 01-25-2011 at 12:15 PM.
#3
oh, and also...
if anyone knows of a yota shop around the portland oregon area that would be nice too. thanks everyone.
if anyone knows of a yota shop around the portland oregon area that would be nice too. thanks everyone.
Last edited by heliyota; 01-25-2011 at 12:27 PM.
#4
I have a 1989 DLX 4x4 with stock steel 15x6 rims. I have also been searching on Craigslist for a set of 1996-2002 15x7 Tacoma Alloy Rims as well but have not purchased yet. I have seen a photo of a 1994 DLX (this site) with these wheels and wonder if wheel spacers are needed?
#5
Searched on wheel offset on this site and found this:
89-up trucks and 90-up 4Runners came with the 15x7JJ-8 wheel.
88 and earlier trucks and 89 and earlier 4Runners came with the 15x7JJ-15 wheel.
Saw the same ALY wheels again on Graigslist last night and they came off a 95 Toyota. The person said that his 95 had locking hubs like my 89. I had him read the rim stamp and it was a 15x7JJ-15. So I would have thought this should fit since a more negative offset sets the center of the rim further out. What is the offset of the rims that you purchased?
89-up trucks and 90-up 4Runners came with the 15x7JJ-8 wheel.
88 and earlier trucks and 89 and earlier 4Runners came with the 15x7JJ-15 wheel.
Saw the same ALY wheels again on Graigslist last night and they came off a 95 Toyota. The person said that his 95 had locking hubs like my 89. I had him read the rim stamp and it was a 15x7JJ-15. So I would have thought this should fit since a more negative offset sets the center of the rim further out. What is the offset of the rims that you purchased?
Thread
Thread Starter
Forum
Replies
Last Post
skoti89
Off Road Trip Planning, Expeditions, Trips, & Events
0
07-06-2015 07:45 PM