The Great White Shark attack SAS... - Page 3

spanish-road · 01-28-2009, 09:52 AM

yeah Im going to Palmer for a class this may and want to get some climbing in at the forestry research station and maybe some glacier action.

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

mudcrasher · 01-28-2009, 01:33 PM

Quote:

Originally Posted by toyospearo

HOLY CRAP DUDE!!!
That is high.
What kind of harness are you using for that?

I use a DBI Salla tower harness. they make the harnesses specifically for cell tower work. a lot of the other guys use elk river harnesses.

the highest i have ever climbed was a 210ft tower. when i got to the top i stood on the top and stuck my hands in the air just so i could get that extra 7 ft or so.

904_runner · 01-29-2009, 10:37 PM

BUMP?

Progress?

toyospearo · 01-29-2009, 11:08 PM

The only progress I made on this build is registering, insuring and tuning up my VW PITA.

California's financial crisis hit me in the face today at the DMV.

I waited 3 hours to get this van registered. The DMV here has 13 windows to handle all the vehicle crap and as a result of Ca. layoffs there were 3 windows open.

I actually fell asleep waiting. LOL
Holy crap, the fourth cylinder plug on the 1.9 liter Vanagon is a total nightmare to get to. I did manage to swap it out and after I did a complete tune up on this van it is SUPER quick!
I need to get this Vanagon running "smooth" before I start the choppity chop chop on my yota, otherwise I will be without a DD.

algranger · 01-30-2009, 12:09 AM

sounds like the dmv in salt lake city

LTrunner · 01-30-2009, 02:16 PM

here in good'ole MA we have a RMV(registery of motor vechiles) it's just like the DVM most other states have only wrost....3 hour wait is like the MINIUM wait time

904_runner · 01-30-2009, 02:31 PM

hum.

Well, not to rub it in your face or anything but the last time i went to the dmv in December to register my truck. THere WAS NOBODY in there. Absolutely no wait.

Its like that a lot at the local one.

Ah you can get the swap done in a weekend

shadowcat · 01-30-2009, 03:56 PM

Is there a link to do that led swap that looks cool.

toyospearo · 02-05-2009, 12:30 PM

My SAS is going slow but its going.

toyospearo · 03-01-2009, 09:58 PM

No new work done as of late

The photos below tell the story. The surf up here has been good lately (those two breaks are below my house.) Most of this winter it has sucked and recently it as turned on.
I have most of the kit to finish off my SA. Still need the leafs.

iamsuperbleeder · 04-11-2009, 10:28 PM

hey this might be a little off topic, but when you put the LED's in the cluster of your Toy, did it mess up the dimmer function? Do they dim out like the standard filament ones do?

Any progress on the SAS an of yet?

toyospearo · 04-12-2009, 09:50 AM

Mine dim a little right before they shut completely off. They do not dim in the same way as the stock alien green ones.
I am placing my kit order on Mon or Tue for the rest of my swap, soo it is progressing ..slowly.

MSR · 04-12-2009, 12:31 PM

Hope to hear from you has been a while, I'm starting mine and finishing up the 85, the 79 is getting parted out and the 80 is getting its 20r back

yodathespian87 · 04-14-2009, 11:51 AM

Lucky you. The view... Wow! I just have a view of Pikes Peak. Looking forward to seeing some progress on the SAS.

idayota · 04-14-2009, 12:21 PM

what happened to the build?

toyospearo · 04-14-2009, 08:46 PM

Its delayed due to a few shoots I am doing. One is a Bass Pro Shops add. Low budget but super complicated. I assure you as soon as I see the light the choppity chop chop starts

toyospearo · 04-14-2009, 08:49 PM

Quote:

Originally Posted by MSR

Hope to hear from you has been a while, I'm starting mine and finishing up the 85, the 79 is getting parted out and the 80 is getting its 20r back

Hey Mike, I will be in touch later in the month. It is film season in NoHum and things are kinda hectic.
Thanks for the note.
D

iamsuperbleeder · 04-14-2009, 09:44 PM

Quote:

Originally Posted by toyospearo

Mine dim a little right before they shut completely off. They do not dim in the same way as the stock alien green ones.
I am placing my kit order on Mon or Tue for the rest of my swap, soo it is progressing ..slowly.

that's what I was thinking...

I had green ones in my base model cluster before the SR5 swap, and they didn't dim at all, they just turned off at a point, lol

toyospearo · 04-28-2009, 06:00 PM

Oh its on!!!
I am eagerly awaiting big brown!

The chop chop starts at stupid o'clock AM!

86Toyrunna · 04-28-2009, 06:26 PM

WOOOHOOO finaly!

keep us updated

toyospearo · 04-28-2009, 06:44 PM

Yes, I know, this SAS has been delayed.
I don't know how many Yotatechers know about Bass Pro Shops but I have been working on their new add. In addition to working behind the scenes, I was also an actor in the fly fishing part of it. In the pics below are me with the director and on set. The add will be coming out sometime this summer. Super cool crew to work with! We don't have any Bass Pro Shops near Humboldt but it looks like a great store! The creative people behind this ad were so nice to work with.
I am actually glad its over and I can now focus on the chop chop

Check that camera

and that tight loop..hahahhaha.. JK

Anyway, enough nonsense. Time for the swap!

algranger · 04-29-2009, 12:13 AM

Nice, SAS time now

toyospearo · 04-29-2009, 01:47 PM

Diving got in the way of the chop chop. The cupboard is bare. Now the cupboard is full and I have some dinner.
I posted these up for Spanishroad. One clicker 10" Ab and a couple of 9.5's and a fat Cabazon and a few lings.

BTW a Cabazon's main diet is crabs..and as a result its meat tastes like crab meat. It is THEE best fish on the planet IMHO.
Chop starts in an hour

14lb ling

904_runner · 04-29-2009, 01:51 PM

START IT NOW MAN!!!!

LOL

ill be watching..

:eye:

toyospearo · 04-29-2009, 02:02 PM

i had to get the dive pics in or this would be just another millionth SAS thread same old chop, weld and flex pics on the ramp in back of Safeway

01-29-2009, 10:37 PM	#53 (permalink)
904_runner Registered User Join Date: Mar 2008 Location: Chico, California Posts: 3,782	BUMP? Progress? __________________ Mike 1990 4runner: 3.4 swapped, 5-speed, sas'd, Rear leaf swap, Locked, 5.29's, 39.5" iroks on Beadlocks, Armor'd Longfields, Duals coming soon: My build thread http://www.yotatech.com/f152/904_run...thread-158746/ http://www.treadlightly.org/ http://www.pirate4x4.com/tech/billav...ery/index.html

01-29-2009, 11:08 PM	#54 (permalink)
toyospearo Registered User Join Date: May 2008 Location: way way nor cal Posts: 1,583	The only progress I made on this build is registering, insuring and tuning up my VW PITA. California's financial crisis hit me in the face today at the DMV. I waited 3 hours to get this van registered. The DMV here has 13 windows to handle all the vehicle crap and as a result of Ca. layoffs there were 3 windows open. I actually fell asleep waiting. LOL Holy crap, the fourth cylinder plug on the 1.9 liter Vanagon is a total nightmare to get to. I did manage to swap it out and after I did a complete tune up on this van it is SUPER quick! I need to get this Vanagon running "smooth" before I start the choppity chop chop on my yota, otherwise I will be without a DD. __________________ 94 Ext. cab 22re Aussied, 4.88's, SAS,ed, FLATBED, Old Man Emu rear leafs w/TG 5.5" shackles, TG sliders, LC Header, Marlin super HD clutch, 32's- Swamper TSL's- RC rims, Badland Bumper, lifted, lighted, LED'ed, Warned, alternatored (LC High ouput), Hammed, gusseted, trussed, etc, etc... My build thread http://www.yotatech.com/f152/great-w...ck-sas-164531/ My Flatbed build thread http://www.yotatech.com/f88/toyospea...-build-191787/

01-30-2009, 12:09 AM	#55 (permalink)
algranger Registered User Join Date: Aug 2007 Location: Here in the PNW Posts: 3,264	sounds like the dmv in salt lake city __________________ . . . I said lie, for me lying under a process tree . . . . Last edited by algranger; 01-30-2009 at 12:10 AM.

01-30-2009, 02:16 PM	#56 (permalink)
LTrunner Registered User Join Date: Mar 2007 Location: spfld, MA Posts: 394	here in good'ole MA we have a RMV(registery of motor vechiles) it's just like the DVM most other states have only wrost....3 hour wait is like the MINIUM wait time __________________ 1989 4runner 3.0L,5spd swaped,Marlin HD clucth,v6 to gear t-case,dual case x-member,chevy 63's,1" blocks,u-blot flip,shock trianglation,Marlin rear bumper,sliders,1"body lift,soft top,welded rear,steelies,33"BFG MTs,SAS frt w/ RUF--->http://www.yotatech.com/f116/my-very...runner-143762/ Destination...OFF ROAD

01-30-2009, 02:31 PM	#57 (permalink)
904_runner Registered User Join Date: Mar 2008 Location: Chico, California Posts: 3,782	hum. Well, not to rub it in your face or anything but the last time i went to the dmv in December to register my truck. THere WAS NOBODY in there. Absolutely no wait. Its like that a lot at the local one. Ah you can get the swap done in a weekend __________________ Mike 1990 4runner: 3.4 swapped, 5-speed, sas'd, Rear leaf swap, Locked, 5.29's, 39.5" iroks on Beadlocks, Armor'd Longfields, Duals coming soon: My build thread http://www.yotatech.com/f152/904_run...thread-158746/ http://www.treadlightly.org/ http://www.pirate4x4.com/tech/billav...ery/index.html

01-30-2009, 03:56 PM	#58 (permalink)
shadowcat Registered User Join Date: Mar 2006 Posts: 13	Is there a link to do that led swap that looks cool.

02-05-2009, 12:30 PM	#59 (permalink)
toyospearo Registered User Join Date: May 2008 Location: way way nor cal Posts: 1,583	My SAS is going slow but its going. __________________ 94 Ext. cab 22re Aussied, 4.88's, SAS,ed, FLATBED, Old Man Emu rear leafs w/TG 5.5" shackles, TG sliders, LC Header, Marlin super HD clutch, 32's- Swamper TSL's- RC rims, Badland Bumper, lifted, lighted, LED'ed, Warned, alternatored (LC High ouput), Hammed, gusseted, trussed, etc, etc... My build thread http://www.yotatech.com/f152/great-w...ck-sas-164531/ My Flatbed build thread http://www.yotatech.com/f88/toyospea...-build-191787/ Last edited by toyospearo; 04-28-2009 at 07:11 PM.

03-01-2009, 09:58 PM	#60 (permalink)
toyospearo Registered User Join Date: May 2008 Location: way way nor cal Posts: 1,583	No new work done as of late The photos below tell the story. The surf up here has been good lately (those two breaks are below my house.) Most of this winter it has sucked and recently it as turned on. I have most of the kit to finish off my SA. Still need the leafs. __________________ 94 Ext. cab 22re Aussied, 4.88's, SAS,ed, FLATBED, Old Man Emu rear leafs w/TG 5.5" shackles, TG sliders, LC Header, Marlin super HD clutch, 32's- Swamper TSL's- RC rims, Badland Bumper, lifted, lighted, LED'ed, Warned, alternatored (LC High ouput), Hammed, gusseted, trussed, etc, etc... My build thread http://www.yotatech.com/f152/great-w...ck-sas-164531/ My Flatbed build thread http://www.yotatech.com/f88/toyospea...-build-191787/

04-11-2009, 10:28 PM	#61 (permalink)
iamsuperbleeder Contributing Member Join Date: Feb 2008 Location: Casselberry, Fl Posts: 5,252	hey this might be a little off topic, but when you put the LED's in the cluster of your Toy, did it mess up the dimmer function? Do they dim out like the standard filament ones do? Any progress on the SAS an of yet? __________________ 91 PU, 4wd, manual, 22re, .30-over, engnbldr RV head and 261 cam, MC 1200lbs clutch, misc LCE, engnbldr, and MC parts and HW, Pacesetter header and exhaust kit, Rancho UCA's , 4Crawler 1" diff and sway bar drop and 1.5" BJ spacers, WabFab 3.5" shackles, 31x10.5 pavement-pounding ATs on ProComp Extreme Alloys, misc SR5 interior goodies swapped in, 1000watt stereo system MySpace

04-12-2009, 09:50 AM	#62 (permalink)
toyospearo Registered User Join Date: May 2008 Location: way way nor cal Posts: 1,583	Mine dim a little right before they shut completely off. They do not dim in the same way as the stock alien green ones. I am placing my kit order on Mon or Tue for the rest of my swap, soo it is progressing ..slowly. __________________ 94 Ext. cab 22re Aussied, 4.88's, SAS,ed, FLATBED, Old Man Emu rear leafs w/TG 5.5" shackles, TG sliders, LC Header, Marlin super HD clutch, 32's- Swamper TSL's- RC rims, Badland Bumper, lifted, lighted, LED'ed, Warned, alternatored (LC High ouput), Hammed, gusseted, trussed, etc, etc... My build thread http://www.yotatech.com/f152/great-w...ck-sas-164531/ My Flatbed build thread http://www.yotatech.com/f88/toyospea...-build-191787/

04-12-2009, 12:31 PM	#63 (permalink)
MSR Registered User Join Date: Aug 2007 Location: Humboldt Ca. Posts: 334	Hope to hear from you has been a while, I'm starting mine and finishing up the 85, the 79 is getting parted out and the 80 is getting its 20r back __________________ www.mikesspecialtyrepair.com

04-14-2009, 11:51 AM	#64 (permalink)
yodathespian87 Contributing Member Join Date: Apr 2008 Location: Colorado Springs, Colorado Posts: 465	Lucky you. The view... Wow! I just have a view of Pikes Peak. Looking forward to seeing some progress on the SAS. __________________ 86 Pickup 4x2, Manual (Sold) 87 Extra Cab Pickup 4x4, Manual (Sold) 93 4Runner 4x4, Manual, 3.4 Swap In progress 90 4Runner 4x4, Manual, Blown 3.0 (Stripping out for parts then to become a trail rig/camping/fun truck) 94 Lexus SC400, 1UZ, magnaflow exhaust, after market headlights, bought for parts for the swap into the 90 4Runner

04-14-2009, 12:21 PM	#65 (permalink)
idayota Registered User Join Date: Dec 2006 Location: Boise, ID Posts: 575	what happened to the build? __________________ *Wherever, Whenever, However...Tread Lightly!***

04-14-2009, 08:46 PM	#66 (permalink)
toyospearo Registered User Join Date: May 2008 Location: way way nor cal Posts: 1,583	Its delayed due to a few shoots I am doing. One is a Bass Pro Shops add. Low budget but super complicated. I assure you as soon as I see the light the choppity chop chop starts __________________ 94 Ext. cab 22re Aussied, 4.88's, SAS,ed, FLATBED, Old Man Emu rear leafs w/TG 5.5" shackles, TG sliders, LC Header, Marlin super HD clutch, 32's- Swamper TSL's- RC rims, Badland Bumper, lifted, lighted, LED'ed, Warned, alternatored (LC High ouput), Hammed, gusseted, trussed, etc, etc... My build thread http://www.yotatech.com/f152/great-w...ck-sas-164531/ My Flatbed build thread http://www.yotatech.com/f88/toyospea...-build-191787/

04-28-2009, 06:00 PM	#69 (permalink)
toyospearo Registered User Join Date: May 2008 Location: way way nor cal Posts: 1,583	Oh its on!!! I am eagerly awaiting big brown! The chop chop starts at stupid o'clock AM! __________________ 94 Ext. cab 22re Aussied, 4.88's, SAS,ed, FLATBED, Old Man Emu rear leafs w/TG 5.5" shackles, TG sliders, LC Header, Marlin super HD clutch, 32's- Swamper TSL's- RC rims, Badland Bumper, lifted, lighted, LED'ed, Warned, alternatored (LC High ouput), Hammed, gusseted, trussed, etc, etc... My build thread http://www.yotatech.com/f152/great-w...ck-sas-164531/ My Flatbed build thread http://www.yotatech.com/f88/toyospea...-build-191787/

04-28-2009, 06:26 PM	#70 (permalink)
86Toyrunna Registered User Join Date: Oct 2008 Location: B-TOWN, ORYGUN Posts: 431	WOOOHOOO finaly! keep us updated __________________ current: 1986 4Runner, Rebuilt 22RE with engnbldr HP head, cam'd, battery/intake swap, SASed, 5.29s, detroit rear, 35in MTRs, trussed and armored axles, marlin HD clutch, soon to be dual cased, TG rear bumper, Best mod todate CHROME METAL SR5 DOOR HANDLES, thats whats up RIP: 1985 Standard Cab SR5 pickup, add-a-leafs and shackels, 33" BFGs, it died a horrible death (50mph roll over) DD: 2006 Scion Tc w/TRD Supercharge and TRD stainless cat-back exhaust

04-28-2009, 06:44 PM	#71 (permalink)
toyospearo Registered User Join Date: May 2008 Location: way way nor cal Posts: 1,583	Yes, I know, this SAS has been delayed. I don't know how many Yotatechers know about Bass Pro Shops but I have been working on their new add. In addition to working behind the scenes, I was also an actor in the fly fishing part of it. In the pics below are me with the director and on set. The add will be coming out sometime this summer. Super cool crew to work with! We don't have any Bass Pro Shops near Humboldt but it looks like a great store! The creative people behind this ad were so nice to work with. I am actually glad its over and I can now focus on the chop chop Check that camera and that tight loop..hahahhaha.. JK Anyway, enough nonsense. Time for the swap! __________________ 94 Ext. cab 22re Aussied, 4.88's, SAS,ed, FLATBED, Old Man Emu rear leafs w/TG 5.5" shackles, TG sliders, LC Header, Marlin super HD clutch, 32's- Swamper TSL's- RC rims, Badland Bumper, lifted, lighted, LED'ed, Warned, alternatored (LC High ouput), Hammed, gusseted, trussed, etc, etc... My build thread http://www.yotatech.com/f152/great-w...ck-sas-164531/ My Flatbed build thread http://www.yotatech.com/f88/toyospea...-build-191787/ Last edited by toyospearo; 04-28-2009 at 07:00 PM.

04-29-2009, 12:13 AM	#72 (permalink)
algranger Registered User Join Date: Aug 2007 Location: Here in the PNW Posts: 3,264	Nice, SAS time now __________________ . . . I said lie, for me lying under a process tree . . . .

04-29-2009, 01:47 PM	#73 (permalink)
toyospearo Registered User Join Date: May 2008 Location: way way nor cal Posts: 1,583	Diving got in the way of the chop chop. The cupboard is bare. Now the cupboard is full and I have some dinner. I posted these up for Spanishroad. One clicker 10" Ab and a couple of 9.5's and a fat Cabazon and a few lings. BTW a Cabazon's main diet is crabs..and as a result its meat tastes like crab meat. It is THEE best fish on the planet IMHO. Chop starts in an hour 14lb ling __________________ 94 Ext. cab 22re Aussied, 4.88's, SAS,ed, FLATBED, Old Man Emu rear leafs w/TG 5.5" shackles, TG sliders, LC Header, Marlin super HD clutch, 32's- Swamper TSL's- RC rims, Badland Bumper, lifted, lighted, LED'ed, Warned, alternatored (LC High ouput), Hammed, gusseted, trussed, etc, etc... My build thread http://www.yotatech.com/f152/great-w...ck-sas-164531/ My Flatbed build thread http://www.yotatech.com/f88/toyospea...-build-191787/ Last edited by toyospearo; 04-29-2009 at 10:14 PM.

04-29-2009, 01:51 PM	#74 (permalink)
904_runner Registered User Join Date: Mar 2008 Location: Chico, California Posts: 3,782	START IT NOW MAN!!!! LOL ill be watching.. :eye: __________________ Mike 1990 4runner: 3.4 swapped, 5-speed, sas'd, Rear leaf swap, Locked, 5.29's, 39.5" iroks on Beadlocks, Armor'd Longfields, Duals coming soon: My build thread http://www.yotatech.com/f152/904_run...thread-158746/ http://www.treadlightly.org/ http://www.pirate4x4.com/tech/billav...ery/index.html

04-29-2009, 02:02 PM	#75 (permalink)
toyospearo Registered User Join Date: May 2008 Location: way way nor cal Posts: 1,583	i had to get the dive pics in or this would be just another millionth SAS thread same old chop, weld and flex pics on the ramp in back of Safeway __________________ 94 Ext. cab 22re Aussied, 4.88's, SAS,ed, FLATBED, Old Man Emu rear leafs w/TG 5.5" shackles, TG sliders, LC Header, Marlin super HD clutch, 32's- Swamper TSL's- RC rims, Badland Bumper, lifted, lighted, LED'ed, Warned, alternatored (LC High ouput), Hammed, gusseted, trussed, etc, etc... My build thread http://www.yotatech.com/f152/great-w...ck-sas-164531/ My Flatbed build thread http://www.yotatech.com/f88/toyospea...-build-191787/

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shark attack caught on video!	Mason Dixon	Off Topic Talk	6	04-16-2007 04:03 PM
Clip of a real shark attack	jethro	Off Topic Talk	6	02-10-2005 10:46 AM
Merry Christmas from the Great White North!	leebee	Off Topic Talk	16	12-30-2004 01:12 PM
Dolphins protect lifeguards from Great White Shark	Bob_98SR5	Off Topic Talk	6	11-24-2004 09:14 AM
Hi from the Great White north!!!!!	CANADA4RNR	95.5-2004 Tacomas & 96-2002 4Runners	9	04-23-2004 12:37 PM