These are 5.29's...Right?
03-07-2011, 01:25 PM
#1
Registered User
Thread Starter
Join Date: May 2007
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
These are 5.29's...Right?
I recently bought what I was told was a 4.88 3rd member for my 92 pickup. After pulling it apart for a no-slip locker install, I counted 7 teeth on the pinion after thinking it was originally 8. I recounted the freshly pulled ring gear and came up with 37 teeth. So, basic math here says 37 div by 7 equals 5.285, or 5.29's, correct?
Probably the dumb question for the day. I'll attempt to add pics of each.
Probably the dumb question for the day. I'll attempt to add pics of each.
Last edited by Miyoda; 04-16-2011 at 02:57 PM.
03-07-2011, 04:20 PM
#4
Registered User
Thread Starter
Join Date: May 2007
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I did luck out. ironically I was leaning towards 5.29s but found this on craigslist, thinking 4.88s will be okay. Powertrax no slip goin in, also courtesy of craigslist.
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthCent]: Toyota Trail Gear 5.29 Ring and pinion x2 NEW
YotaLogic
Axles - Suspensions - Tires - Wheels
12
11-17-2015 06:27 AM
FS[PacNorWest]: 1987 4Runner SAS, 22RE, 5Spd, Dual Cases, etc
toyotasaurus
Vehicles - Trailers (Complete)
0
09-24-2015 03:30 PM
justdifferentials
Vendors Build-Ups (Build-Up Section)
0
09-05-2015 06:52 PM
coffey50
Offroad Tech
17
07-28-2015 10:55 AM
