home made fender flares?
11-25-2009, 09:31 PM
#1
Registered User
Thread Starter
Join Date: Aug 2009
Location: wisconsin
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
home made fender flares?
I made a post about mud tires, and someone said somthing about making fender flares out of garden edging, so how would i go about doing that. anyone ever done it or have any other ideas? sorry not sure what category to put this under... thanks
11-26-2009, 12:01 AM
#2
Contributing Member
The best way to describe it is roll out the edging so it lays flat on the ground
now pick it up and fit a piece to the under side of the fender well so it is sticking outwardly giving the extra 2-3 inchs of fender well extension and cut to fit
then with some self tapping screws screw it into place on the lip of the fender so that it sticks out as far as possible covering the tire sticking outside the fender and repeat on the other three wheel wells.
now pick it up and fit a piece to the under side of the fender well so it is sticking outwardly giving the extra 2-3 inchs of fender well extension and cut to fit
then with some self tapping screws screw it into place on the lip of the fender so that it sticks out as far as possible covering the tire sticking outside the fender and repeat on the other three wheel wells.
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
07-14-2020 08:35 PM
jasonty
Pre 84 Trucks (Build-Up Section)
41
12-23-2018 01:00 PM
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM
defrag4
Vehicles - Trailers (Complete)
0
07-31-2015 10:50 AM
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
07-10-2015 06:21 PM
