Trail Gear rear bumper install
05-18-2012, 02:20 PM
#1
Trail Gear rear bumper install
Pardon my ignorance but I am getting ready to install a TG rear bumper on my 88' 4runner. There are two brackets on each side from the old bumper. I am assuming that you cut these off before installing the bumper. Is it possible to leave the bracket closest to the wheel wells still attached? It looks to support the mud flaps. All opinions are welcome.
05-18-2012, 07:29 PM
#3
Registered User
I did that on my old 86 4runner even though I wasn't running a TG bumper. If for some bizarre reason you ever want to put the old bumper back on keep them on.
A grinder with a cut-off wheel works really well for that
A grinder with a cut-off wheel works really well for that
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthCent]: Toyota Trail Gear 5.29 Ring and pinion x2 NEW
YotaLogic
Axles - Suspensions - Tires - Wheels
12
11-17-2015 06:27 AM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM
dirtrider0129
Buying & Selling Advice - Feeler/Gauging Interest
10
06-24-2015 12:24 PM
