Throttle sticking at idle
#3
Registered User
This happens in my 81 and I can see the throttle return spring is weak that is next to the carb. Haven't figured out a solution as the dealer does not list the part number at all.
#4
Registered User
22r or 22re? mine kinda sticks because the cable itself is frayed a little and as mentioned above the return springs really wore out. Mine's a carb'd 22r with a weber. Rigging a return spring solved most of my issues, might not be as simple to do on a 22re though.
Last edited by xxxtreme22r; 08-14-2011 at 09:16 AM.
#7
Registered User
Go ahead and spray the WD40 on whatever, but I'd disconnect the throttle cable from the throttle body linkage and atleast try to pinpoint what's hanging up. I mean, it could be the throttle plate itself, but you wouldn't see it if you hadn't looked in there or cleaned it in a while.
Trending Topics
#9
Registered User
pull the cable out, and spray some carb-cleaner into the cable itself to clean out the garbage..
I did this, and it came out black on the other end.
Next, go buy some white-lithium grease and lube up your cable.
I did this, and it came out black on the other end.
Next, go buy some white-lithium grease and lube up your cable.
Thread
Thread Starter
Forum
Replies
Last Post
Blamalam
86-95 Trucks & 4Runners
22
03-12-2022 07:34 AM