quarter panel help!
12-14-2008, 03:36 PM
#1
Registered User
Thread Starter
Join Date: Dec 2008
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
quarter panel help!
ok so i just got some fiberglass fenders for my 93 4runner so the front is taken care of
but on the rear i have rust and alot of it.. i have heard of ppl cutting the rear for more tire clearance.. anybody do that on here?? pics??
but on the rear i have rust and alot of it.. i have heard of ppl cutting the rear for more tire clearance.. anybody do that on here?? pics??
12-14-2008, 04:58 PM
#2
Registered User
http://www.toyotafiberglass.com/4runner.htm
Scroll down. I picked up a set of the metal patch panels from Corey and they fit perfectly. You have two choices for install. You can weld them in or do what I did and cut out the rust and "glue" them on using panel bonding adhesive.
Scroll down. I picked up a set of the metal patch panels from Corey and they fit perfectly. You have two choices for install. You can weld them in or do what I did and cut out the rust and "glue" them on using panel bonding adhesive.
Thread
Thread Starter
Forum
Replies
Last Post
1uzRunner
84-85 Trucks & 4Runners (Build-Up Section)
63
11-10-2018 03:58 PM
83yotastockR
86-95 Trucks & 4Runners (Build-Up Section)
11
11-10-2015 06:54 AM
FS[PacNorWest]: 1987 4Runner SAS, 22RE, 5Spd, Dual Cases, etc
toyotasaurus
Vehicles - Trailers (Complete)
0
09-24-2015 03:30 PM
Buckaroo_Banzai
86-95 Trucks & 4Runners (Build-Up Section)
2
09-24-2015 07:26 AM
