HELP! IFS ADD front diff
#1
Registered User
Thread Starter
Join Date: Mar 2006
Location: Santa Cruz, CA
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
HELP! IFS ADD front diff
My brother is down and we are trying to put my old 4.56 front diff w/ ADD in his 93 truck with no ADD(long shaft). We have done a lot of reading but can't figure out how to get this needle bearing out We rented a slide hammer but ther is nothing to grab onto with the atachment
Does the ring and pinion have to come out and then pound it out from the inside??? We have LOTS of diagrams and the FSM.... What are we missing??
How do we get the bearing and sleeve out? Any help is greatly appreciated.
Does the ring and pinion have to come out and then pound it out from the inside??? We have LOTS of diagrams and the FSM.... What are we missing??
How do we get the bearing and sleeve out? Any help is greatly appreciated.
#3
Registered User
Thread Starter
Join Date: Mar 2006
Location: Santa Cruz, CA
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Took ring gear out and still couldnt get the sleeve out with the slide hammer. We ended up just putting a seal over the bearing. We'll see how long it holds.
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
FS[GreatLakes]: Toyota collection part out
88sasturbotoy
Axles - Suspensions - Tires - Wheels
2
08-11-2015 01:56 AM
scottyg486
Offroad Tech
3
07-19-2015 05:34 PM
TokyoD23
95.5-2004 Tacomas & 96-2002 4Runners
4
07-12-2015 06:01 AM