Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS
Sponsored by:
Sponsored by: DashLynx

Digital Thermometer Install

Thread Tools
 
Search this Thread
 
Old 05-01-2009, 09:42 PM
  #1  
Registered User
Thread Starter
 
OutlawMike's Avatar
 
Join Date: Dec 2007
Location: Santa Rosa, CA
Posts: 710
Likes: 0
Received 2 Likes on 2 Posts
Digital Thermometer Install

I have always wanted a thermometer in my 1st gen Runner to read the outside temp. My wife's Outback has one, all my friends have them, I have thermometer envy....

Picked this thing up from Kragen tonight for $6.99 plus tax, my three year old and I were out of the house to let the wife take a break, wondering the isles of Kragen at 7:00 at night:

[IMG][/IMG]

It runs on a AAA battery, no wiring into the rig necessary. I has a light in it, but it is weak. Daylight use only, for the most part.

It has this hinged mounting plate that I shoved behind the molding at the top of the windshield. You have to pull the molding down a bit to get it in there, it holds it really tight:

[IMG][/IMG]

Installed it here:





Ran the wire along the molding at the top of the windshield, down the A-pillar, into the dash, down to the rubber firewall grommet for the hood release...:



...along the hood release cable, behind the D-side headlight, and stuck the sensor here:



It reads inside/outside and has a clock. Not that I need that, the dash has a clock and the radio has a clock, I'm swimming in clocks, just not enough thermometers, or horsepower, or money, or time, but more than enough clocks.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nvdesertrunner
84-85 Trucks & 4Runners
13
05-11-2020 08:18 PM
tobylab
86-95 Trucks & 4Runners
4
12-03-2015 08:41 PM
punks_is_4x4
86-95 Trucks & 4Runners
10
08-21-2015 01:35 PM
luckypig44
Newbie Tech Section
4
07-19-2015 11:25 AM



Quick Reply: Digital Thermometer Install



All times are GMT -8. The time now is 11:17 AM.