Back to the Future
#61
Registered User
Thread Starter
Finally getting the truck to the body shop for engine bay painting
Time for some cleaning
and..... motor taken to the Machine shop. Busy weekend for me.
Time for some cleaning
and..... motor taken to the Machine shop. Busy weekend for me.
Last edited by BK2TFUTURE; 05-15-2013 at 11:54 PM.
#65
Registered User
Thread Starter
#67
Registered User
Thread Starter
I'm using simple green and brake cleaner.
Should I skip on he simple green?
#70
Registered User
Thread Starter
I took the TPS off to clean the throttle body and adjusted it according to the instructions here. www.4crawler.com/4x4/CheapTricks/TPS/index.shtml
Yeah, too much reading so i just taped it up and painted around.
#71
Registered User
Thread Starter
Guys, I'm about to go crazy on auto parts warehouse. Time is getting close. I should have the motor and the truck back in the next week or 2.
I have a list so far:
-Fram Fuel Filter
-Replacement Axle Assembly (passenger/driver)
-AISIN Clutch Master Cylinder
-AISIN Clutch Slave Cylinder
-AISIN Clutch Kit
-AISIN Fan Clutch
-Beck Arnley Fuel Injector (4)
-Belts suggestion???
-Shocks suggestions???
By all means if there is something you recommend I'm all ears.
I have a list so far:
-Fram Fuel Filter
-Replacement Axle Assembly (passenger/driver)
-AISIN Clutch Master Cylinder
-AISIN Clutch Slave Cylinder
-AISIN Clutch Kit
-AISIN Fan Clutch
-Beck Arnley Fuel Injector (4)
-Belts suggestion???
-Shocks suggestions???
By all means if there is something you recommend I'm all ears.
#73
Registered User
Thread Starter
Yeah the Rig is turning 26 this year and I am the 4th owner. Trying to figure out what else needs to be changed (since everything is out).
I was also looking at suspension (front and back) but I don't know what really to get.
I was also looking at suspension (front and back) but I don't know what really to get.
#75
I couldn't remember if you needed the out of business smittybuilt bumpers but there is a guy in nc selling front and rear. If your going to do it right, you better have the bumpers!
http://www.nc4x4.com/forum/index.php...wheels.133002/
http://www.nc4x4.com/forum/index.php...wheels.133002/
#76
Registered User
Thread Starter
I've picked up the bumpers some time ago but had to drive all the way down to L.A to pick them up. It was a nice 16 hour round trip and a lot of scenery to enjoy along the way (pacific coast).
The front has a dent and the rear has a rusted hole which i'm going to have to have repaired and powder coated.
Thank you for looking out!
Hopefully the motor will be ready by tomorrow or Tuesday. I have some toys arriving that day.
The front has a dent and the rear has a rusted hole which i'm going to have to have repaired and powder coated.
Thank you for looking out!
Hopefully the motor will be ready by tomorrow or Tuesday. I have some toys arriving that day.
#79
Registered User
iTrader: (-1)
You mean the mirrors right, cause MJ's a little rounder now and might not
Those are part of the dealer bolt on "tow" package. Just about any random ones of that style should do. You can source new ones from JC whitney and such. Older chevy trucks have the same style if you want to try the scrap yards.
Those are part of the dealer bolt on "tow" package. Just about any random ones of that style should do. You can source new ones from JC whitney and such. Older chevy trucks have the same style if you want to try the scrap yards.