rod knock. please help
#1
Registered User
Thread Starter
Join Date: Aug 2009
Location: lompoc
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
rod knock. please help
i have a bad rod knock in my truck, my friends dad says i need to re-build the first cylinder, what parts do i need to buy, and does anyone know how expensive this will be?
#6
Registered User
Join Date: Oct 2009
Location: Natchitoches, La
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
I bought a complete kit off of ebay 3 weeks ago with shipping it was $295, but I just done a quick rebuild, Bottom line you get out what you put into it, so take your time and have the crank checked, and the rods if its knocking that bad
#7
Registered User
go to engnbldr...you'll definitely need a FULL gasket set (might as well do the whole thing ya know)..and a new set of bearings..then you have the option of a cam..you could bore the block and put in bigger cylinders..you could go all out and get a performance head too..lol
but if you're just wantin to get it done..i would say parts alone will be around $200-$275
full rebuild..with cam..new clutch and labor(CHEAP labor at that..he worked for pretty cheap..but he was really slow lmao) was around $1300..thats with a new crank.and new rods..lol
but if you're just wantin to get it done..i would say parts alone will be around $200-$275
full rebuild..with cam..new clutch and labor(CHEAP labor at that..he worked for pretty cheap..but he was really slow lmao) was around $1300..thats with a new crank.and new rods..lol
Trending Topics
#9
Thread
Thread Starter
Forum
Replies
Last Post
kawazx636
The Classifieds GraveYard
34
10-06-2021 03:03 PM
primordialbeast117
86-95 Trucks & 4Runners
11
12-19-2015 12:23 PM
83yotastockR
86-95 Trucks & 4Runners (Build-Up Section)
11
11-10-2015 06:54 AM