I am new to toyota, jus got one cant say i know too much about so far
#1
Registered User
Thread Starter
Join Date: Jul 2007
Location: moultrie, GA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
I am new to toyota, jus got one cant say i know too much about so far
jus bought 1982 standard longbed pickup. tires it had were dry rot so i bought new 33 12.5 15 micky thompson baja claw radials. The motor tag says it came with 22r, it has a 20r. it has 4spd manual tranny i believe came with the 22r...previous owner took off carburetor so i bought 32/36 electric choke weber carb that ive mounted but havent hooked anything too because i dont know where anything hooks up to. I have pictures of a few different things on the motor i need some info on.
#4
welcome to the world of Toyota! You might want to check on ebay for a Toyota Factory Service Manual for your '82. I bought one for my '81. If you get lucky enough to find one, it is well worth the money as the info is so much more complete vs. what you would find in a Hayne's or Chiltons...
#5
Registered User
welcome to the world of Toyota! You might want to check on ebay for a Toyota Factory Service Manual for your '82. I bought one for my '81. If you get lucky enough to find one, it is well worth the money as the info is so much more complete vs. what you would find in a Hayne's or Chiltons...
I made the mistake of not grabbing one that the guy said I could take when I was buying some parts, forgot it on the front seat and he sold the cab so im assuming its long gone.
#6
Contributing Member
Join Date: May 2006
Location: South Carolina
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
The messed up PO engine/tranny combo seems pretty standard with these old trucks. Mine came with the wrong head for the engine. The VIN said 4runner, the cab is a pickup, and about 300' of wiring for the 8 lights he had stashed everywhere. I'm still trying to undo all the redneck-engineering (and while doing some of my own )
Trending Topics
#8
Registered User
Thread Starter
Join Date: Jul 2007
Location: moultrie, GA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
welcome to the world of Toyota! You might want to check on ebay for a Toyota Factory Service Manual for your '82. I bought one for my '81. If you get lucky enough to find one, it is well worth the money as the info is so much more complete vs. what you would find in a Hayne's or Chiltons...
#9
Registered User
Thread Starter
Join Date: Jul 2007
Location: moultrie, GA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
well if you had any pictures of like jus the carb with out the filter on it so i can see all the hoses and stuff that would be easy but i do have pictures let me post some..
the ground goes strait from battery to here dont know if it supposed to?
this wire goes from a bunch of wires the go to sensors can it be the choke wire?
what is the black wire supposed to be hooked too? i can see where somthing else is supposed to be hooked to the starter too?
Last edited by ESKIMO; 07-15-2007 at 06:12 PM.
#11
Registered User
what is the black wire supposed to be hooked too? i can see where somthing else is supposed to be hooked to the starter too?[/QUOTE]
mine looks the same on my 79, starts fine, i dunno
mine looks the same on my 79, starts fine, i dunno
#14
Registered User
Actually, another Yotatech'r sent me some wiring diagrams for a 22R, I can post them up in a bit(gimme a half hour at most).
Last edited by Island_Yota; 07-18-2007 at 06:30 PM.
#15
Registered User
Heres the one you need, the rest are digrams of the A/C, tail lights etc.. if you need them let me know. From what ive seen in your pics you are missing all of the green connectors(factory), not a big deal... you can get away with butt connectors and tape but its gonna be harder to figure out, You will also need some fusable link if you dont want to fry half the stuff in your cab when your battery falls over and shorts or something like that, ▓▓▓▓▓ happens. Please, for all things good dont use Maretts or just twist your wires together, use butt connectors and tape over them at least.
I can get you pictures of my wiring tommoro if you want, its alot easier than trying to understand a blurry diagram.
I can get you pictures of my wiring tommoro if you want, its alot easier than trying to understand a blurry diagram.
#18
Registered User
http://www.racetep.com/weber.html
or
http://www.webercarbsdirect.com/
the first link also has good tech help
or
http://www.webercarbsdirect.com/
the first link also has good tech help
#19
Registered User
Thread Starter
Join Date: Jul 2007
Location: moultrie, GA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
someone is interested in purchasing my truck from me...whats a good price if i almost dont want too? 800 on tires 4oo for truck 300 or 400 for carburetor.
#20
Registered User
I wouldnt sell it, Hard to come by and you might regret it.
Is it still having problems? We can help you get it going, I honestly forgot about this thread.
Id say a good price for the truck would be $2500 or around there if you are going to sell it, but thats what they go for up here.. so it might seem ridiculous.