peckm888

dubud07

thats a nice truck peck. whats the difference between the celica tranny and a pickup tranny?

4banginRunner

Just noticed my thread is a sticky now
woohoo i feel special

Pre 84 FTW!

dropzone

iTrader: (6)

Yeah, I asked Molly (lysmachia) to do it. Figured it would get a lot more exposure seems to be working.

brianrbhutch

My '83 bought a month ago my new project

Dieselfuel12v

80' flatbed. Gonna slap some new tires on her pretty soon, hopefully some 33x12.5 Km2's., the 33x14's arent needed for what Im gonna be doing now.

83

Do us a favor and shrink your photos down to like 800x600. Nice truck!

BANDAID

Got it last year at the beginning of summer, and she has been good to me. So far i have had to replace the hubs, so i got Warn. Put in new seats and 4-point harnesses, just got rock sliders today, and an internal rear hoop so i can properly mount my harnesses. I am planning on gearing to 5.29 as soon as i have the money. I also have a 2050watt amp, running 2 12" subs that sit behind the seats. Still needs a bit of work and stuff like that. But for a DD she works great for me.

Just got the sliders today, got a real good deal on them too! I will post more pictures as i keep building her up.

<a href="http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=19511132&a lbumID=1820003&imageID=50652465"><img src="http://hotlink.myspacecdn.com/images02/33/eb5374789f67433c8886aac3a8d9a63c/m.jpg" alt="" /></a>

dropzone

iTrader: (6)

Finally got my truck back. Rear suspension, dual cases etc done

sits a little high but the springs should settle a little

Dieselfuel12v

Sorry about that, I got a new 24" monitor, so everything seems normal

83

No problem. Just easier to look at when it fits!

dolemite

1st gens r awsome here is mine

83 yota

it needs work but everything can always be better. i haven't done anything to it but the kid who had it before me gutted the inside. i love seeing what it can do i have been up to big bear and Johnson valley (ca) so far and looking forward to more.

blueridder2207

Here's my 83 SR5 how it started with hybrid rears up front and 63's in the rear and 35" MTRs And here it is after weldin the rear buildin a flatbed and throwin some rattle can green on lol

dubud07

i like that green even though im more of a OD fan

snailwagon

I'm new to this forum, so here is my first post. Don't have any good pics yet. I got this 81' recently from a friend (with no trans) for $500. It has 112K on the odometer and the interior is incredibly clean. It was all original, and on 4 flat tires when I towed it home.

So far the list of mods is short. I put on some 33" BFGs on 2.75" BS rims I had laying around from one of my cruisers. Since it came with no trans, I picked up a rebuilt 5spd; too bad I'll never need that 5th gear. I also built some sliders for it and bobbed the bed 16" and the frame 5". Also put an Aussie in the back and mounted storage and spare tire stuff in the back. And don't forget the important high performance cup holder. It took the standard work to get it running and reliable after not being registered for quite a few years.

I've only done two trail runs in it and it suprised me at how capable it is. (I highly recommend the Bullfrog Trail in Johnson Vly., fun stuff). I really enjoy the lack of weight and the angle stability that my cruisers lack. Plus the gas gauge moves real slow.

edit: guess I need to figure out how to put real pics up.

dubud07

your truck would look cool with some tube bumpers and sittin a little higher

snailwagon

Yeah, the truck is super low in the front. I call it the stinkbug effect, ass high, front low. I'm cool on the tube bumpers for now. The truck doesn't have any dents or rust besides a few dings from the bed being used for work. Original paint is still nice enough to polish. My priorities for it are:

1. Power steering and crossover (have everything but the arms so far)
2. around 3" of lift. I'm trying to keep it as low as possible to fit 37"s. I will soon tub the front firewall. A rear bumper will go on once I figure out what length springs I'm using. The frame protrudes a small amount from the rear body. I left room when I did the bob to account for using 63" springs, which I have laying around.
3. Doubler and low gears for the t-case. I want to do both at the same time so I can go 23spline. New crossmember with it. I am going to do this at the same time as the lift so I only have to do my driveshafts once.
4. Roll bar - leaning towards a partial exo, with some of the tubes running under the panels. I don't like the look of exos on such cool vehicles.
5. New seats, maybe cab modification so I can actually fit inside the truck (I'm only 5' 11'' and man is it cramped).
6. Regeared difs. Currently has 3.90s. booh!
7. Paint it something tacky. My painter friend said buy the paint and he'll give it a quickie for $30.

So beware of plenty of questions.

83

What did you do with the bed? That thing looks like it's in perfect shape.

83 stump jumper

First sorry pics are small taken on phone. But here is my 83 3 1/2 inches of suspension lift, spring over, 33 bfg kms, 87 rear end, high steer and a weber. new improvements soon to come.