front bumper 99 SR5, southern cal.

TC4RNR · 09-19-2008, 02:28 PM

well, i'm getting an used ARB so i'm selling this one. it's still on my 99 for now because the ARB needs some work done on the mounting bracket.

i partially designed this one, the top part was a downey bumper(bolt on top of stock bumper), i made a crossmember using 3/16" plate and .120 rectangular tubing, not just a piece of plate. added 2 front legs, extented the side wings, and added 2 extra legs on the side with .120 round tubing. .

it's very sturdy, it's held by total of 10 bolts on the frame, 5 on each side. all at factory locations, plus it is completely bolt-on, no body modification needed. once you have your stock bumper removed, you can install it in 5 minutes by yourself with a 14mm wrench.

the top crossbar and hoop were powder coated, rest were painted with duplicolor spray on bedliner.

two light tabs on the hoop, you can either mount couple lights on it or, mount your Hi-Lift(i did). the aluminum radiator skid plate alone costed me $85, it's made of 3/16" aluminum plate machine bent and punched.

no shipping, $150
i'll be in san diego from saturday morning till tuesday night, so if you guys down there want to check it out, let me know.

front:

all mountings points are on the frame

crossmember

TC4RNR · 09-21-2008, 08:37 PM

sold !

09-19-2008, 02:28 PM	#1 (permalink)
TC4RNR Registered User Join Date: May 2007 Location: so. cal. Posts: 477	front bumper 99 SR5, southern cal. well, i'm getting an used ARB so i'm selling this one. it's still on my 99 for now because the ARB needs some work done on the mounting bracket. i partially designed this one, the top part was a downey bumper(bolt on top of stock bumper), i made a crossmember using 3/16" plate and .120 rectangular tubing, not just a piece of plate. added 2 front legs, extented the side wings, and added 2 extra legs on the side with .120 round tubing. . it's very sturdy, it's held by total of 10 bolts on the frame, 5 on each side. all at factory locations, plus it is completely bolt-on, no body modification needed. once you have your stock bumper removed, you can install it in 5 minutes by yourself with a 14mm wrench. the top crossbar and hoop were powder coated, rest were painted with duplicolor spray on bedliner. two light tabs on the hoop, you can either mount couple lights on it or, mount your Hi-Lift(i did). the aluminum radiator skid plate alone costed me $85, it's made of 3/16" aluminum plate machine bent and punched. no shipping, $150 i'll be in san diego from saturday morning till tuesday night, so if you guys down there want to check it out, let me know. front: all mountings points are on the frame crossmember __________________ http://i172.photobucket.com/albums/w...gca/agreed.jpg 94 4Runner, SR5 3.0V6, 4WD, 5spd: SOLD 99 4Runner, SR5, 3.4L 4WD, 5spd. 265/75/16 BFG A/T. full SS 1.2 lift, RedLine Fluids, Marlin 1200 Clutch, ARB front bumper, BruceTS rear bumper, roof busket, hitch mount tire carrier, Tundra Brakes, Brembo rotors, BudBuilt skid/belly, Lightforce 240 Blitz, PiAA HID, Stubb's HD-SKO sliders.

09-21-2008, 08:37 PM	#2 (permalink)
TC4RNR Registered User Join Date: May 2007 Location: so. cal. Posts: 477	sold ! __________________ http://i172.photobucket.com/albums/w...gca/agreed.jpg 94 4Runner, SR5 3.0V6, 4WD, 5spd: SOLD 99 4Runner, SR5, 3.4L 4WD, 5spd. 265/75/16 BFG A/T. full SS 1.2 lift, RedLine Fluids, Marlin 1200 Clutch, ARB front bumper, BruceTS rear bumper, roof busket, hitch mount tire carrier, Tundra Brakes, Brembo rotors, BudBuilt skid/belly, Lightforce 240 Blitz, PiAA HID, Stubb's HD-SKO sliders.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wanted: 99 sr5 front bumper	wjwerdna	Items Wanted	3	12-02-2007 10:42 AM
1999 SR5 Front Bumper	landozion	Misc Stuff (Vehicle Related)	8	12-02-2007 10:31 AM
1 pair of 2 billet 1.25" wheel spacers, southern cal. $48 shipped	TC4RNR	Axles/Suspensions/Tires/Wheels	3	09-19-2007 03:35 AM
Where to have sliders welded on in Southern Cal	04sport4x4	General Vehicle Related Topics (Non Year Related)	3	06-19-2006 12:45 PM
96-98 SR5 front bumper/valance	jakengle	Items Wanted	2	03-02-2006 05:32 AM